--
-- Copyright (C) 2010 The FreeBSD Foundation
-- All rights reserved.
--
-- This documentation was written by Shteryana Sotirova Shopova under
-- sponsorship from the FreeBSD Foundation.
--
-- Redistribution and use in source and binary forms, with or without
-- modification, are permitted provided that the following conditions
-- are met:
-- 1. Redistributions of source code must retain the above copyright
--    notice, this list of conditions and the following disclaimer.
-- 2. Redistributions in binary form must reproduce the above copyright
--    notice, this list of conditions and the following disclaimer in the
--    documentation and/or other materials provided with the distribution.
--
-- THIS SOFTWARE IS PROVIDED BY AUTHOR AND CONTRIBUTORS ``AS IS'' AND
-- ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-- IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-- ARE DISCLAIMED.  IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE
-- FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-- DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-- OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-- HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-- LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-- OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-- SUCH DAMAGE.
--
-- $FreeBSD$
--

BEGEMOT-WIRELESS-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
    Counter32, Integer32, TimeTicks, Unsigned32, mib-2
	FROM SNMPv2-SMI
    TEXTUAL-CONVENTION, MacAddress, TruthValue, RowStatus,
    DisplayString
	FROM SNMPv2-TC
    InterfaceIndex, ifIndex FROM IF-MIB
    begemot
	FROM BEGEMOT-MIB;

begemotWlan MODULE-IDENTITY
    LAST-UPDATED "201005170000Z"
    ORGANIZATION "The FreeBSD Foundation"
    CONTACT-INFO
	    "		Shteryana Shopova

	     Postal:	12 Andrey Lyapchev Blvd.
			block 2, ap.19
			1797 Sofia
			Bulgaria

	     Fax:	N/A

	     E-Mail:	syrinx@FreeBSD.org"
    DESCRIPTION
	    "The Begemot MIB for managing IEEE802.11 interfaces."
    REVISION     "201005170000Z"
    DESCRIPTION
	    "Initial revision."
    ::= { begemot 210 }

-- ---------------------------------------------------------- --
-- Textual conventions
-- ---------------------------------------------------------- --
WlanMgmtReasonCode ::= TEXTUAL-CONVENTION
    STATUS	current
    DESCRIPTION
	"Enumeration of reason and codes used in IEEE802.11
	management frames to indicate why an action took place."
    SYNTAX	INTEGER {
		    unspecified(1),
		    authenticationExpire(2),
		    authenticationLeave(3),
		    associationExpire(4),
		    associationTooMany(5),
		    notAuthenticated(6),
		    notAssociated(7),
		    associationLeave(8),
		    associationNotAuthenticated(9),
-- XXX: TODO - FIXME
		    dissassocPwrcapBad(10),
		    dissassocSuperchanBad(11),
		    ieInvalid(13),
		    micFailure(14),
		    fourWayHandshakeTimeout(15),
		    groupKeyUpdateTimeout(16),
		    ieIn4FourWayDiffers(17),
		    groupCipherInvalid(18),
		    pairwiseCiherInvalid(19),
		    akmpInvalid(20),
		    unsupportedRsnIeVersion(21),
		    invalidRsnIeCap(22),
		    dot1xAuthFailed(23),
		    cipherSuiteRejected(24),
		    unspeciffiedQos(32),
		    insufficientBw(33),
		    tooManyFrames(34),
		    outsideTxOp(35),
		    leavingQbss(36),
		    badMechanism(37),
		    setupNeeded(38),
		    timeout(39)
		}

WlanMgmtMeshReasonCode ::= TEXTUAL-CONVENTION
    STATUS	current
    DESCRIPTION
	"Enumeration of reason and codes used in IEEE802.11
	mesh routing management frames to indicate why an
	action took place."
    SYNTAX	INTEGER {
-- XXX: TODO - FIXME
		    peerLinkCancelled(2),
		    maxPeers(3),
		    cpViolation(4),
		    closeRcvd(5),
		    maxRetries(6),
		    confirmTimeout(7),
		    invalidGtk(8),
		    inconsistentParams(9),
		    invalidSecurity(10),
		    perrUnspecified(11),
		    perrNoFI(12),
		    perrDestUnreach(13)
		}

WlanMgmtStatusCode ::= TEXTUAL-CONVENTION
    STATUS	current
    DESCRIPTION
	"Enumeration of reason and codes used in IEEE802.11
	management frames to indicate what the result of an
	operation is."
    SYNTAX	INTEGER {
-- XXX: TODO - FIXME
		    success(0),
		    unspecified(1),
		    capabilitiesInfo(10),
		    notAssociated(11),
		    other(12),
		    algorithm(13),
		    sequence(14),
		    challenge(15),
		    timeout(16),
		    tooMany(17),
		    basicRate(18),
		    spRequired(19),
		    pbccRequired(20),
		    caRequired(21),
		    specMgmtRequired(22),
		    pwrcapRequire(23),
		    superchanRequired(24),
		    shortSlotRequired(25),
		    dssofdmRequired(26),
		    missingHTCaps(27),
		    invalidIE(40),
		    groupCipherInvalid(41),
		    pairwiseCipherInvalid(42),
		    akmpInvalid(43),
		    unsupportedRsnIEVersion(44),
		    invalidRsnIECap(45),
		    cipherSuiteRejected(46)
		}

WlanRegDomainCode ::= TEXTUAL-CONVENTION
    STATUS	current
    DESCRIPTION
	"Enumeration of regdomain codes."
    SYNTAX	INTEGER {
			fcc(1),
			ca(2),
			etsi(3),
			etsi2(4),
			etsi3(5),
			fcc3(6),
			japan(7),
			korea(8),
			apac(9),
			apac2(10),
			apac3(11),
			row(12),
			none(13),
			debug(14),
			sr9(15),
			xr9(16),
			gz901(17)
		}

WlanIfaceDot11nPduType ::= TEXTUAL-CONVENTION
    STATUS	current
    DESCRIPTION
	"Enumeration of values for PDU transmit/receive enabled."
    SYNTAX	INTEGER {
			disabled(0),
			rxOnly(1),
			txOnly(2),
			txAndRx(3)
		}

WlanPeerCapabilityFlags ::= TEXTUAL-CONVENTION
    STATUS	current
    DESCRIPTION
	"A list of capability bits that may be advertised by a peer."
    SYNTAX	BITS {
			ess(1),
			ibss(2),
			cfPollable(3),
			cfPollRequest(4),
			privacy(5),
			shortPreamble(6),
			pbcc(7),
			channelAgility(8),
			shortSlotTime(9),
			rsn(10),
			dsssofdm(11)
		}

WlanIfPhyMode ::= TEXTUAL-CONVENTION
    STATUS	current
    DESCRIPTION
	"A list of wireless PHY operating modes."
    SYNTAX	INTEGER {
			auto(1),
			dot11a(2),
			dot11b(3),
			dot11g(4),
			fh(5),
			turboA(6),
			turboG(7),
			sturboA(8),
			dot11na(9),
			dot11ng(10),
			ofdmHalf(11),
			ofdmQuarter(12)
		}

-- ---------------------------------------------------------- --
-- Subtrees in the Begemot Wireless MIB
-- ---------------------------------------------------------- --
begemotWlanNotifications	OBJECT IDENTIFIER ::= { begemotWlan 0 }

begemotWlanInterface		OBJECT IDENTIFIER ::= { begemotWlan 1 }

begemotWlanScanning		OBJECT IDENTIFIER ::= { begemotWlan 2 }

begemotWlanStatistics		OBJECT IDENTIFIER ::= { begemotWlan 3 }

begemotWlanWep			OBJECT IDENTIFIER ::= { begemotWlan 4 }

begemotWlanMACAccessControl	OBJECT IDENTIFIER ::= { begemotWlan 5 }

begemotWlanMeshRouting		OBJECT IDENTIFIER ::= { begemotWlan 6 }

-- ---------------------------------------------------------- --
-- begemotWlanMultimedia	OBJECT IDENTIFIER ::= { begemotWlan 7 }
-- ---------------------------------------------------------- --

-- ---------------------------------------------------------- --
-- Cloned wireless interfaces' database
-- ---------------------------------------------------------- --
wlanInterfaceTable OBJECT-TYPE
    SYNTAX	SEQUENCE OF WlanInterfaceEntry
    MAX-ACCESS	not-accessible
    STATUS	current
    DESCRIPTION
	"A table that contains the list of cloned wireless
	interfaces created on the system."
    ::= { begemotWlanInterface 1 }

wlanInterfaceEntry OBJECT-TYPE
    SYNTAX	WlanInterfaceEntry
    MAX-ACCESS	not-accessible
    STATUS	current
    DESCRIPTION
	"Information for a cloned wireless interface."
    INDEX { wlanIfaceName }
    ::= { wlanInterfaceTable 1 }

WlanInterfaceEntry ::= SEQUENCE {
    wlanIfaceIndex				InterfaceIndex,
    wlanIfaceName				DisplayString,
    wlanParentIfName				DisplayString,
    wlanIfaceOperatingMode			INTEGER,
    wlanIfaceFlags				BITS,
    wlanIfaceBssid				MacAddress,
    wlanIfaceLocalAddress			MacAddress,
    wlanIfaceStatus				RowStatus,
    wlanIfaceState				INTEGER
}

wlanIfaceIndex OBJECT-TYPE
    SYNTAX	InterfaceIndex
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The ifIndex of this cloned wireless interface."
    ::= { wlanInterfaceEntry 1 }

wlanIfaceName OBJECT-TYPE
    SYNTAX	DisplayString (SIZE(1..32))
    MAX-ACCESS	read-create
    STATUS	current
    DESCRIPTION
	"The name of this cloned wireless interface."
    ::= { wlanInterfaceEntry 2 }

wlanParentIfName OBJECT-TYPE
    SYNTAX	DisplayString (SIZE(1..32))
    MAX-ACCESS	read-create
    STATUS	current
    DESCRIPTION
	"The name of this cloned wireless interface's parent hardware
	interface."
    ::= { wlanInterfaceEntry 3 }

wlanIfaceOperatingMode OBJECT-TYPE
    SYNTAX	INTEGER {
			ibss(0),
			station(1),
			wds(2),
			adhocDemo(3),
			hostAp(4),
			monitor(5),
			meshPoint(6),
			tdma(7)
    		}
    MAX-ACCESS	read-create
    STATUS	current
    DESCRIPTION
	"The desired operating mode of the cloned wireless interface."
    DEFVAL	{ station }
    ::= { wlanInterfaceEntry 4 }

wlanIfaceFlags OBJECT-TYPE
    SYNTAX	BITS {
			uniqueBssid(1),
			noBeacons(2),
			wdsLegacy(3)
		}
    MAX-ACCESS	read-create
    STATUS	current
    DESCRIPTION
	"Flags per cloned wireless interface used during creation."
    ::= { wlanInterfaceEntry 5 }

wlanIfaceBssid OBJECT-TYPE
    SYNTAX	MacAddress
    MAX-ACCESS	read-create
    STATUS	current
    DESCRIPTION
	"The BSSID assigned to a cloned wireless interface operating in
	WDS mode."
    ::= { wlanInterfaceEntry 6 }

wlanIfaceLocalAddress OBJECT-TYPE
    SYNTAX	MacAddress
    MAX-ACCESS	read-create
    STATUS	current
    DESCRIPTION
	"The unique local MAC address assigned to the cloned wireless
	interface during creation."
    ::= { wlanInterfaceEntry 7 }

wlanIfaceStatus OBJECT-TYPE
    SYNTAX	RowStatus
    MAX-ACCESS	read-create
    STATUS	current
    DESCRIPTION
	"This column allows creation or deletion of cloned wireless
	interfaces."
    ::= { wlanInterfaceEntry 8 }

wlanIfaceState OBJECT-TYPE
    SYNTAX	INTEGER {
			up(1),
			down(2)
		}
    MAX-ACCESS	read-create
    STATUS	current
    DESCRIPTION
	"The operating state of the interface."
    ::= { wlanInterfaceEntry 9 }

wlanIfParentTable OBJECT-TYPE
    SYNTAX	SEQUENCE OF WlanIfParentEntry
    MAX-ACCESS	not-accessible
    STATUS	current
    DESCRIPTION
	"A table that contains information about the parent hardware
	interface of every cloned wireless interface in the system."
    ::= { begemotWlanInterface 2 }

wlanIfParentEntry OBJECT-TYPE
    SYNTAX	WlanIfParentEntry
    MAX-ACCESS	not-accessible
    STATUS	current
    DESCRIPTION
	"Information for the parent hardware interface of a cloned
	wireless interface."
    AUGMENTS { wlanInterfaceEntry }
    ::= { wlanIfParentTable 1 }

WlanIfParentEntry ::= SEQUENCE {
    wlanIfParentDriverCapabilities		BITS,
    wlanIfParentCryptoCapabilities		BITS,
    wlanIfParentHTCapabilities			BITS
}

wlanIfParentDriverCapabilities OBJECT-TYPE
    SYNTAX	BITS {
			station(1),
			ieee8023encap(2),
			athFastFrames(3),
			athTurbo(4),
			ibss(5),
			pmgt(6),
			hostAp(7),
			ahDemo(8),
			swRetry(9),
			txPmgt(10),
			shortSlot(11),
			shortPreamble(12),
			monitor(13),
			dfs(14),
			mbss(15),
			wpa1(16),
			wpa2(17),
			burst(18),
			wme(19),
			wds(20),
			bgScan(21),
			txFrag(22),
			tdma(23)
		}
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The driver capabilities of this cloned interface's parent."
    ::= { wlanIfParentEntry 1 }

wlanIfParentCryptoCapabilities OBJECT-TYPE
    SYNTAX	BITS {
			wep(1),
			tkip(2),
			aes(3),
			aesCcm(4),
			tkipMic(5),
			ckip(6)
		}
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The hardware cryptographic capabilities of this cloned
	interface's parent."
    ::= { wlanIfParentEntry 2 }

wlanIfParentHTCapabilities OBJECT-TYPE
    SYNTAX	BITS {
			ldpc(1),
			chwidth40(2),
			greenField(3),
			shortGi20(4),
			shortGi40(5),
			txStbc(6),
			delba(7),
			amsdu7935(8),
			dssscck40(9),
			psmp(10),
			fortyMHzIntolerant(11),
			lsigTxOpProt(12),
			htcAmpdu(13),
			htcAmsdu(14),
			htcHt(15),
			htcSmps(16),
			htcRifs(17)
		}
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The hardware High Throughput capabilities of this cloned
	interface's parent."
    ::= { wlanIfParentEntry 3 }

wlanIfaceConfigTable OBJECT-TYPE
    SYNTAX	SEQUENCE OF WlanIfaceConfigEntry
    MAX-ACCESS	not-accessible
    STATUS	current
    DESCRIPTION
	"A table that contains a list of configuration parameters per
	cloned wireless interface. Some of the parameters may not be
	applicable depending on the underlying device's hardware
	capabilities and operating mode of the virtual interface."
    ::= { begemotWlanInterface 3 }

wlanIfaceConfigEntry OBJECT-TYPE
    SYNTAX	WlanIfaceConfigEntry
    MAX-ACCESS	not-accessible
    STATUS	current
    DESCRIPTION
	"A list of configuration parameters for a cloned wireless interface."
    AUGMENTS { wlanInterfaceEntry }
    ::= { wlanIfaceConfigTable 1 }

WlanIfaceConfigEntry ::= SEQUENCE {
    wlanIfacePacketBurst			TruthValue,
    wlanIfaceCountryCode			OCTET STRING,
    wlanIfaceRegDomain				INTEGER,
    wlanIfaceDesiredSsid			OCTET STRING,
    wlanIfaceDesiredChannel			INTEGER,
    wlanIfaceDynamicFreqSelection		TruthValue,
    wlanIfaceFastFrames				TruthValue,
    wlanIfaceDturbo				TruthValue,
    wlanIfaceTxPower				INTEGER,
    wlanIfaceFragmentThreshold			INTEGER,
    wlanIfaceRTSThreshold			INTEGER,
    wlanIfaceWlanPrivacySubscribe		TruthValue,
-- Parameters for station mode
    wlanIfaceBgScan				TruthValue,
    wlanIfaceBgScanIdle				INTEGER,
    wlanIfaceBgScanInterval			INTEGER,
    wlanIfaceBeaconMissedThreshold		INTEGER,
    wlanIfaceDesiredBssid			MacAddress,
    wlanIfaceRoamingMode			INTEGER,
-- Additional parameters when operating in host-ap/ad-hoc mode
    wlanIfaceDot11d				TruthValue,
    wlanIfaceDot11h				TruthValue,
    wlanIfaceDynamicWds				TruthValue,
    wlanIfacePowerSave				TruthValue,
    wlanIfaceApBridge				TruthValue,
    wlanIfaceBeaconInterval			INTEGER,
    wlanIfaceDtimPeriod				INTEGER,
    wlanIfaceHideSsid				TruthValue,
    wlanIfaceInactivityProccess			TruthValue,
    wlanIfaceDot11gProtMode			INTEGER,
    wlanIfaceDot11gPureMode			TruthValue,
    wlanIfaceDot11nPureMode			TruthValue,
    wlanIfaceDot11nAmpdu			INTEGER,
    wlanIfaceDot11nAmpduDensity			INTEGER,
    wlanIfaceDot11nAmpduLimit			INTEGER,
    wlanIfaceDot11nAmsdu			INTEGER,
    wlanIfaceDot11nAmsduLimit			INTEGER,
    wlanIfaceDot11nHighThroughput		TruthValue,
    wlanIfaceDot11nHTCompatible			TruthValue,
    wlanIfaceDot11nHTProtMode			INTEGER,
    wlanIfaceDot11nRIFS				TruthValue,
    wlanIfaceDot11nShortGI			TruthValue,
    wlanIfaceDot11nSMPSMode			INTEGER,
-- Parameters when operating in tdma mode
    wlanIfaceTdmaSlot				INTEGER,
    wlanIfaceTdmaSlotCount			INTEGER,
    wlanIfaceTdmaSlotLength			INTEGER,
    wlanIfaceTdmaBeaconInterval			INTEGER
}

wlanIfacePacketBurst OBJECT-TYPE
    SYNTAX	TruthValue
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The value of this object controls whether packet bursting is
	enabled on the interface."
    ::= { wlanIfaceConfigEntry 1 }

wlanIfaceCountryCode OBJECT-TYPE
    SYNTAX	OCTET STRING (SIZE(3))
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The value of this object controls the country regulatory
	constraints for operation of this wireless interface. The first
	two octets of this string is the two character country code as
	described in ISO/IEC 3166-1. The third octet shall contain one
	of the following:

	1. an ASCII space character, if the regulations under which the
	interface is operating include all environments in the specified
	country.

	2. an ASCII 'O' character, if the country's regulations are for
	Outdoor environment only.

	3. an ASCII 'I' character, if the country's regulations are for
	Indoor environment only."
    ::= { wlanIfaceConfigEntry 2 }

wlanIfaceRegDomain OBJECT-TYPE
    SYNTAX	WlanRegDomainCode
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"This object specifies the regulatory domain to use when calculating
	the regulatory constraints for operation of the interface."
    ::= { wlanIfaceConfigEntry 3 }

wlanIfaceDesiredSsid OBJECT-TYPE
    SYNTAX	OCTET STRING (SIZE(0..32))
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The desired SSID for the interface as an ASCII  string.
	Specifying an empty string shall remove the current configured
	SSID."
    ::= { wlanIfaceConfigEntry 4 }

wlanIfaceDesiredChannel OBJECT-TYPE
    SYNTAX	INTEGER
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The desired operating channel for this interface. The value of this
	column is the channel index (wlanIfaceChannelId) of the corresponding
	entry from the wlanIfaceChannelTable. The interface status must be
	down so that the current operating channel may be set properly."
    ::= { wlanIfaceConfigEntry 5 }

wlanIfaceDynamicFreqSelection OBJECT-TYPE
    SYNTAX	TruthValue
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The value of this object specifies whether Dynamic Frequency
	Selection (DFS) as specified in 802.11h is enabled on an
	interface that supports 802.11h and DFS."
    DEFVAL	{ false }
    ::= { wlanIfaceConfigEntry 6 }

wlanIfaceFastFrames OBJECT-TYPE
    SYNTAX	TruthValue
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The value of this object controls whether use of Atheros Fast
	Frames is enabled when when communicating with another Fast
	Frames-capable station. The value is only meaningful for
	interfaces that support Atheros Fast Frames."
    ::= { wlanIfaceConfigEntry 7 }

wlanIfaceDturbo OBJECT-TYPE
    SYNTAX	TruthValue
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The value of this object controls whether use of Atheros Dynamic
	Turbo mode is enabled when when communicating with another Dynamic
	Turbo-capable station. The value is only meaningful for interfaces
	that support Atheros Dynamic Turbo mode."
    ::= { wlanIfaceConfigEntry 8 }

wlanIfaceTxPower OBJECT-TYPE
    SYNTAX	INTEGER
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The value of this object controls the power used to transmit
	frames. Accepted values are in units of one tenths of a dBm in
	steps of .5 dBm, e.g setting the value of this object to 155
	results in 15.5 dBm transmit power configured on the interface."
    ::= { wlanIfaceConfigEntry 9 }

wlanIfaceFragmentThreshold OBJECT-TYPE
    SYNTAX	INTEGER (256..2346)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The value of this object controls the threshold for which
	transmitted frames are broken into fragments. Setting the value
	of this object to 2346 will disable transmit fragmentation."
    DEFVAL	{ 2346 }
    ::= { wlanIfaceConfigEntry 10 }

wlanIfaceRTSThreshold OBJECT-TYPE
    SYNTAX	INTEGER (1..2346)
    UNITS	"bytes"
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The value of this object controls the threshold for which
	transmitted frames are preceded by transmission of an RTS
	control frame. Setting the value of this object to 2346 will
	disable transmission of RTS frames."
     DEFVAL	{ 2346 }
   ::= { wlanIfaceConfigEntry 11 }

wlanIfaceWlanPrivacySubscribe OBJECT-TYPE
    SYNTAX	TruthValue
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The value of this object specifies whether Wireless Privacy
	Subscriber support is enabled on the interface."
    ::= { wlanIfaceConfigEntry 12 }

wlanIfaceBgScan OBJECT-TYPE
    SYNTAX	TruthValue
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The value of this object specifies whether background scanning
	is enabled for an interface operating in station mode."
    ::= { wlanIfaceConfigEntry 13 }

wlanIfaceBgScanIdle OBJECT-TYPE
    SYNTAX	INTEGER
    UNITS	"milliseconds"
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The value of this object specifies the minimum time a station must
	be idle before a background scan is initiated on an interface
	operating in station mode."
    DEFVAL	{ 250 }
    ::= { wlanIfaceConfigEntry 14 }

wlanIfaceBgScanInterval OBJECT-TYPE
    SYNTAX	INTEGER
    UNITS	"seconds"
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The value of this object specifies the interval at which background
	scanning is attempted when operating in station mode."
    DEFVAL	{ 300 }
    ::= { wlanIfaceConfigEntry 15 }

wlanIfaceBeaconMissedThreshold OBJECT-TYPE
    SYNTAX	INTEGER (1..255)
    UNITS	"frames"
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The value of this object specifies the number of consecutive missed
	beacons before an interface operating in station mode will attempt
	to search for a new access point."
    DEFVAL	{ 7 }
    ::= { wlanIfaceConfigEntry 16 }

wlanIfaceDesiredBssid OBJECT-TYPE
    SYNTAX	MacAddress
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The value of this object specifies the MAC address of the desired
	access point to use when an interface is operating as a station."
    ::= { wlanIfaceConfigEntry 17 }

wlanIfaceRoamingMode OBJECT-TYPE
    SYNTAX	INTEGER {
			device(1),
			auto(2),
			manual(3)
		}
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The value of this object specifies the desired system behavior
	when the interface is operating as a station and the communication
	with the current access point is broken."
    DEFVAL	{ auto }
    ::= { wlanIfaceConfigEntry 18 }

wlanIfaceDot11d OBJECT-TYPE
    SYNTAX	TruthValue
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The value of this object specifies whether 802.11d specification
	support is enabled."
    DEFVAL	{ false }
    ::= { wlanIfaceConfigEntry 19 }

wlanIfaceDot11h OBJECT-TYPE
    SYNTAX	TruthValue
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The value of this object specifies whether 802.11h support
	including spectrum management is enabled. The value is only
	meaningfull for interfaces that support 802.11h specification."
    DEFVAL	{ false }
    ::= { wlanIfaceConfigEntry 20 }

wlanIfaceDynamicWds OBJECT-TYPE
    SYNTAX	TruthValue
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The value of this object specifies whether Dynamic WDS (DWDS)
	support is enabled. The value is only meaningful for interfaces
	that support Dynamic WDS."
    ::= { wlanIfaceConfigEntry 21 }

wlanIfacePowerSave OBJECT-TYPE
    SYNTAX	TruthValue
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The value of this object specifies whether powersave operation
	is enabled. The value is only meaningful for interfaces that
	support powersave operation."
    ::= { wlanIfaceConfigEntry 22 }

wlanIfaceApBridge OBJECT-TYPE
    SYNTAX	TruthValue
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The value of this object specifies whether packets between
	wireless clients will be passed directly by an interface
	operating in host ap mode. Disabling it may be useful in
	situations when traffic between wireless clients needs to be
	processed with packet filtering."
    DEFVAL	{ true }
    ::= { wlanIfaceConfigEntry 23 }

wlanIfaceBeaconInterval OBJECT-TYPE
    SYNTAX	INTEGER (25..1000)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The value of this object specifies the interval at with beacon
	frames are sent when an interface is operating in ad-hoc or ap
	mode. The beacon interval is specified in TU's (1024 usecs)."
    DEFVAL	{ 100 }
    ::= { wlanIfaceConfigEntry 24 }

wlanIfaceDtimPeriod OBJECT-TYPE
    SYNTAX	INTEGER (1..15)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The value of this object specifies the DTIM period at which
	buffered multicast data frames are transmitted by an interface
	operating in host ap mode. Its value indicates the number of
	beacon intervals between DTIM."
    DEFVAL	{ 1 }
    ::= { wlanIfaceConfigEntry 25 }

wlanIfaceHideSsid OBJECT-TYPE
    SYNTAX	TruthValue
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The value of this object specifies whether broadcasting of the
	SSID in beacon frames and responding to undirected probe request
	frames is enabled for an interface operating in ap mode."
    DEFVAL	{ false }
    ::= { wlanIfaceConfigEntry 26 }

wlanIfaceInactivityProccess OBJECT-TYPE
    SYNTAX	TruthValue
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The value of this object specifies whether inactivity processing
	for associated station on an interface operating in ap mode is
	enabled."
    DEFVAL	{ true }
    ::= { wlanIfaceConfigEntry 27 }

wlanIfaceDot11gProtMode OBJECT-TYPE
    SYNTAX	INTEGER {
			off(1),
			cts(2),
			rtscts(3)
		}
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The value of this object specifies the technique used for
	protecting OFDM frames in a mixed 11b/11g network."
    ::= { wlanIfaceConfigEntry 28 }

wlanIfaceDot11gPureMode OBJECT-TYPE
    SYNTAX	TruthValue
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The value of this object specifies whether only 802.11g-capable
	stations will be allowed to associate to an interface operating
	as access point in 802.11g mode."
    ::= { wlanIfaceConfigEntry 29 }

wlanIfaceDot11nPureMode OBJECT-TYPE
    SYNTAX	TruthValue
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The value of this object specifies whether only HT-capable
	stations will be allowed to associate to an interface operating
	as access point in 802.11n mode."
    ::= { wlanIfaceConfigEntry 30 }

wlanIfaceDot11nAmpdu OBJECT-TYPE
    SYNTAX	WlanIfaceDot11nPduType
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The value of this object specifies whether sending and
	receiving of AMPDU frames is enabled on an interface
	operating in 802.11n mode."
    DEFVAL	{ txAndRx }
    ::= { wlanIfaceConfigEntry 31 }

wlanIfaceDot11nAmpduDensity OBJECT-TYPE
    SYNTAX	INTEGER (0|25|50|100|200|400|800|1600)
    UNITS	"1/100ths-of-microsecond"
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The value of this object specifies the AMPDU density parameter
	for an interface operating in 802.11n mode."
    ::= { wlanIfaceConfigEntry 32 }

wlanIfaceDot11nAmpduLimit OBJECT-TYPE
    SYNTAX	INTEGER (8192|16384|32768|65536)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The value of this object specifies a limit on the AMPDU packet
	size for receiving AMPDU frames for an interface operating in
	802.11n mode."
    ::= { wlanIfaceConfigEntry 33 }

wlanIfaceDot11nAmsdu OBJECT-TYPE
    SYNTAX	WlanIfaceDot11nPduType
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The value of this object specifies whether sending and receiving
	of AMSDU frames is enabled on an interface operating in 802.11n
	mode."
    DEFVAL	{ rxOnly }
    ::= { wlanIfaceConfigEntry 34 }

wlanIfaceDot11nAmsduLimit OBJECT-TYPE
    SYNTAX	INTEGER (3839|7935)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The value of this object specifies a limit on the AMSDU packet
	size when sending and receiving AMSDU frames for an interface
	operating in 802.11n mode."
    ::= { wlanIfaceConfigEntry 35 }

wlanIfaceDot11nHighThroughput OBJECT-TYPE
    SYNTAX	TruthValue
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The value of this object specifies whether use of High Throughput
	(HT) is enabled for an interface operating in 802.11n mode."
    DEFVAL	{ true }
    ::= { wlanIfaceConfigEntry 36 }

wlanIfaceDot11nHTCompatible OBJECT-TYPE
    SYNTAX	TruthValue
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The value of this object specifies whether use of compatibility
	support for pre-802.11n devices is enabled for an interface
	operating in 802.11n mode."
    DEFVAL	{ true }
    ::= { wlanIfaceConfigEntry 37 }

wlanIfaceDot11nHTProtMode OBJECT-TYPE
    SYNTAX	INTEGER {
			off(1),
			rts(2)
		}
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The value of this object specifies the technique used for
	protecting HT frames in a mixed legacy/HT network for interfaces
	operating in 802.11n mode."
    DEFVAL	{ rts }
    ::= { wlanIfaceConfigEntry 38 }

wlanIfaceDot11nRIFS OBJECT-TYPE
    SYNTAX	TruthValue
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The value of this object specifies whether Reduced InterFrame
	Spacing (RIFS) is enabled for an interface operating in 802.11n
	mode on an HT channel."
    ::= { wlanIfaceConfigEntry 39 }

wlanIfaceDot11nShortGI OBJECT-TYPE
    SYNTAX	TruthValue
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The value of this object specifies whether use of Short Guard
	Interval is enabled on an interface operating in 802.11n mode
	on an HT channel."
    ::= { wlanIfaceConfigEntry 40 }

wlanIfaceDot11nSMPSMode OBJECT-TYPE
    SYNTAX	INTEGER {
			disabled(1),
			static(2),
			dynamic(3)
		}
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The value of this object specifies whether use of Spatial Multiplexing
	Power Save (SMPS) is enabled on an interface operating in 802.11n mode
	and whether SMPS mode is set to Static or Dynamic. The value is only
	meaningfull for interfaces that support SMPS."
    ::= { wlanIfaceConfigEntry 41 }

wlanIfaceTdmaSlot OBJECT-TYPE
    SYNTAX	INTEGER (0..2)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The value of this object specifies the slot configuration to use
	when operating in TDMA mode."
    ::= { wlanIfaceConfigEntry 42 }

wlanIfaceTdmaSlotCount OBJECT-TYPE
    SYNTAX	INTEGER (0..2)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The value of this object specifies the number of slots to use to
	setup a BSS for an interface operating in TDMA mode."
    ::= { wlanIfaceConfigEntry 43 }

wlanIfaceTdmaSlotLength OBJECT-TYPE
    SYNTAX	INTEGER (150..65000)
    UNITS	"microseconds"
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The value of this object specifies a slot length that each station
	has when a BSS is setup by an interface operating in TDMA mode."
    DEFVAL	{ 10000 }
    ::= { wlanIfaceConfigEntry 44 }

wlanIfaceTdmaBeaconInterval OBJECT-TYPE
    SYNTAX	INTEGER
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The value of this object specifies the number of superframes at
	which a beacon frame is sent to synchronize the TDMA slot timing
	for interfaces operating in TDMA mode."
    DEFVAL	{ 5 }
    ::= { wlanIfaceConfigEntry 45 }

wlanIfacePeerTable OBJECT-TYPE
    SYNTAX	SEQUENCE OF WlanIfacePeerEntry
    MAX-ACCESS	not-accessible
    STATUS	current
    DESCRIPTION
	"A table that contains information about the associated stations
	for an interface operating as an access point, or the stations
	identified as neighbors in the IBSS for an interface operating in
	adhoc mode."
    ::= { begemotWlanInterface 4 }

wlanIfacePeerEntry OBJECT-TYPE
    SYNTAX	WlanIfacePeerEntry
    MAX-ACCESS	not-accessible
    STATUS	current
    DESCRIPTION
	"An entry that contains information for the associated stations
	for an interface operating as an access point, or the neighboring
	stations of an interface in adhoc mode."
    INDEX { wlanIfaceName, wlanIfacePeerAddress }
    ::= { wlanIfacePeerTable 1 }

WlanIfacePeerEntry ::= SEQUENCE {
    wlanIfacePeerAddress			MacAddress,
    wlanIfacePeerAssociationId			INTEGER,
    wlanIfacePeerVlanTag			INTEGER,
    wlanIfacePeerFrequency			INTEGER,
    wlanIfacePeerCurrentTXRate			INTEGER,
    wlanIfacePeerRxSignalStrength		INTEGER,
    wlanIfacePeerIdleTimer			INTEGER,
    wlanIfacePeerTxSequenceNo			INTEGER,
    wlanIfacePeerRxSequenceNo			INTEGER,
    wlanIfacePeerTxPower			INTEGER,
    wlanIfacePeerCapabilities			BITS,
    wlanIfacePeerFlags				BITS
}

wlanIfacePeerAddress OBJECT-TYPE
    SYNTAX	MacAddress
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The MAC address of this peer."
    ::= { wlanIfacePeerEntry 1 }

wlanIfacePeerAssociationId OBJECT-TYPE
    SYNTAX	INTEGER
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The ID of the associacition with this peer."
    ::= { wlanIfacePeerEntry 2 }

wlanIfacePeerVlanTag OBJECT-TYPE
    SYNTAX	INTEGER (0..4096)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The Vlan Tag for traffic to/from this peer."
    ::= { wlanIfacePeerEntry 3 }

wlanIfacePeerFrequency OBJECT-TYPE
    SYNTAX	INTEGER
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The operating frequency for the link with this peer."
    ::= { wlanIfacePeerEntry 4 }

wlanIfacePeerCurrentTXRate OBJECT-TYPE
    SYNTAX	INTEGER
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The current transmit rate for this peer."
    ::= { wlanIfacePeerEntry 5 }

wlanIfacePeerRxSignalStrength OBJECT-TYPE
    SYNTAX	INTEGER
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The average receive signal strength for this peer."
    ::= { wlanIfacePeerEntry 6 }

wlanIfacePeerIdleTimer OBJECT-TYPE
    SYNTAX	INTEGER
    UNITS	"seconds"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The value of this peer's inactivity timer."
    ::= { wlanIfacePeerEntry 7 }

wlanIfacePeerTxSequenceNo OBJECT-TYPE
    SYNTAX	INTEGER
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The last sequence number transmitted to this peer."
    ::= { wlanIfacePeerEntry 8 }

wlanIfacePeerRxSequenceNo OBJECT-TYPE
    SYNTAX	INTEGER
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The last sequence number received from this peer."
    ::= { wlanIfacePeerEntry 9 }

wlanIfacePeerTxPower OBJECT-TYPE
    SYNTAX	INTEGER
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The transmit power limit for this peer."
    ::= { wlanIfacePeerEntry 10 }

wlanIfacePeerCapabilities OBJECT-TYPE
    SYNTAX	WlanPeerCapabilityFlags
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The capabilities advertised by this peer."
    ::= { wlanIfacePeerEntry 11 }

wlanIfacePeerFlags OBJECT-TYPE
    SYNTAX	BITS {
			authorizedForData(1),
			qosEnabled(2),
			erpEnabled(3),
			powerSaveMode(4),
			authRefHeld(5),
			htEnabled(6),
			htCompat(7),
			wpsAssoc(8),
			tsnAssoc(9),
			ampduRx(10),
			ampduTx(11),
			mimoPowerSave(12),
			sendRts(13),
			rifs(14),
			shortGiHT20(15),
			shortGiHT40(16),
			amsduRx(17),
			amsduTx(18)
		}
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The peer state flags."
    ::= { wlanIfacePeerEntry 12 }

wlanIfaceChannelTable OBJECT-TYPE
    SYNTAX	SEQUENCE OF WlanIfaceChannelEntry
    MAX-ACCESS	not-accessible
    STATUS	current
    DESCRIPTION
	"A table that contains information about the active channels for
	the cloned wireless interfaces in the system."
    ::= { begemotWlanInterface 5 }

wlanIfaceChannelEntry OBJECT-TYPE
    SYNTAX	WlanIfaceChannelEntry
    MAX-ACCESS	not-accessible
    STATUS	current
    DESCRIPTION
	"An entry that contains active channel information for the wireless
	interface."
    INDEX { wlanIfaceName, wlanIfaceChannelId }
    ::= { wlanIfaceChannelTable 1 }

WlanIfaceChannelEntry ::= SEQUENCE {
    wlanIfaceChannelId				INTEGER,
    wlanIfaceChannelIeeeId			INTEGER,
    wlanIfaceChannelType			INTEGER,
    wlanIfaceChannelFlags			BITS,
    wlanIfaceChannelFrequency			INTEGER,
    wlanIfaceChannelMaxRegPower			INTEGER,
    wlanIfaceChannelMaxTxPower			INTEGER,
    wlanIfaceChannelMinTxPower			INTEGER,
    wlanIfaceChannelState			BITS,
    wlanIfaceChannelHTExtension			INTEGER,
    wlanIfaceChannelMaxAntennaGain		INTEGER
}

wlanIfaceChannelId OBJECT-TYPE
    SYNTAX	INTEGER (1..1536)
    MAX-ACCESS	not-accessible
    STATUS	current
    DESCRIPTION
	"The index of this channel entry."
    ::= { wlanIfaceChannelEntry 1 }

wlanIfaceChannelIeeeId OBJECT-TYPE
    SYNTAX	INTEGER (1..256)
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The channel IEEE ID."
    ::= { wlanIfaceChannelEntry 2 }

wlanIfaceChannelType OBJECT-TYPE
    SYNTAX	INTEGER {
			fhss(1),
			dot11a(2),
			dot11b(3),
			dot11g(4),
			tenMHz(5),
			fiveMHz(6),
			turbo(7),
			ht(8)
		}
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The operating channel type for this entry."
    ::= { wlanIfaceChannelEntry 3 }

wlanIfaceChannelFlags OBJECT-TYPE
    SYNTAX	BITS {
			turbo(1),
			cck(2),
			ofdm(3),
			spectrum2Ghz(4),
			spectrum5Ghz(5),
			passiveScan(6),
			dynamicCckOfdm(7),
			gfsk(8),
			spectrum900Mhz(9),
			dot11aStaticTurbo(10),
			halfRate(11),
			quarterRate(12),
			ht20(13),
			ht40u(14),
			ht40d(15),
			dfs(16),
			xmit4ms(17),
			noAdhoc(18),
			noHostAp(19),
			dot11d(20)
		}
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The channel flags."
    ::= { wlanIfaceChannelEntry 4 }

wlanIfaceChannelFrequency OBJECT-TYPE
    SYNTAX	INTEGER
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The channel frequency setting in MHz."
    ::= { wlanIfaceChannelEntry 5 }

wlanIfaceChannelMaxRegPower OBJECT-TYPE
    SYNTAX	INTEGER
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The maximum regulatory tx power in dBm for this channel."
    ::= { wlanIfaceChannelEntry 6 }

wlanIfaceChannelMaxTxPower OBJECT-TYPE
    SYNTAX	INTEGER
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The maximum tx power in units of .5 dBm for this channel."
    ::= { wlanIfaceChannelEntry 7 }

wlanIfaceChannelMinTxPower OBJECT-TYPE
    SYNTAX	INTEGER
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The minimum tx power in units of .5 dBm for this channel."
    ::= { wlanIfaceChannelEntry 8 }

wlanIfaceChannelState OBJECT-TYPE
    SYNTAX	BITS {
			radar(1),
			cacDone(2),
			interferenceDetected(3),
			radarClear(4)
		}
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The channel dynamic state."
    ::= { wlanIfaceChannelEntry 9 }

wlanIfaceChannelHTExtension OBJECT-TYPE
    SYNTAX	INTEGER
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The HT40 extension channel number."
    ::= { wlanIfaceChannelEntry 10 }

wlanIfaceChannelMaxAntennaGain OBJECT-TYPE
    SYNTAX	INTEGER
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The maximum antenna gain in units of .5 dBm."
    ::= { wlanIfaceChannelEntry 11 }

-- ---------------------------------------------------------- --
--  The Scan requests/results for cloned wireless interfaces
-- ---------------------------------------------------------- --

wlanScanConfigTable OBJECT-TYPE
    SYNTAX	SEQUENCE OF WlanScanConfigEntry
    MAX-ACCESS	not-accessible
    STATUS	current
    DESCRIPTION
	"A table that contains a configuration for channel scanning
	initiated via SNMP."
    ::= { begemotWlanScanning 1 }

wlanScanConfigEntry OBJECT-TYPE
    SYNTAX	WlanScanConfigEntry
    MAX-ACCESS	not-accessible
    STATUS	current
    DESCRIPTION
	"Per cloned wireless interface channel scan configuration data.
	The entry will be empty if no scans were initiated via SNMP."
    INDEX { wlanIfaceName }
    ::= { wlanScanConfigTable 1 }

WlanScanConfigEntry ::= SEQUENCE {
    wlanScanFlags				BITS,
    wlanScanDuration				INTEGER,
    wlanScanMinChannelDwellTime			INTEGER,
    wlanScanMaxChannelDwellTime			INTEGER,
    wlanScanConfigStatus			INTEGER
}

wlanScanFlags OBJECT-TYPE
    SYNTAX	BITS {
			noSelection(1),
			activeScan(2),
			pickFirst(3),
			backgroundScan(4),
			once(5),
			noBroadcast(6),
			noAutoSequencing(7),
			flushCashe(8),
			chechCashe(9)
		}
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Desired flags for the channel scan."
    ::= { wlanScanConfigEntry 1 }

wlanScanDuration OBJECT-TYPE
    SYNTAX	INTEGER (1..2147483647)
    UNITS	"milliseconds"
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The desired duration of the scan. Setting the value of this object
	to the highest allowed value will initiate an infinite scan."
    ::= { wlanScanConfigEntry 2 }

wlanScanMinChannelDwellTime OBJECT-TYPE
    SYNTAX	INTEGER
    UNITS	"milliseconds"
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The minimum channel dwelltime for this scan."
    ::= { wlanScanConfigEntry 3 }

wlanScanMaxChannelDwellTime OBJECT-TYPE
    SYNTAX	INTEGER
    UNITS	"milliseconds"
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The maximum channel dwelltime for this scan."
    ::= { wlanScanConfigEntry 4 }

wlanScanConfigStatus OBJECT-TYPE
    SYNTAX	INTEGER {
			unknown(0),
			notStarted(1),
			running(2),
			finished(3),
			cancel(4)
		}
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"This object is used to initiate or cancel channel scanning on the cloned
	interface via SNMP. Setting its value to running(2) will initiate channel
	scanning on the cloned interface, while setting the value to cancel will
	cancel the current ongoing scan. All other values should be returned in
	GET operations only."
    ::= { wlanScanConfigEntry 5 }

wlanScanResultsTable OBJECT-TYPE
    SYNTAX	SEQUENCE OF WlanScanResultsEntry
    MAX-ACCESS	not-accessible
    STATUS	current
    DESCRIPTION
	"A table that contains scan results for a virtual wireless interface."
    ::= { begemotWlanScanning 2 }

wlanScanResultsEntry OBJECT-TYPE
    SYNTAX	WlanScanResultsEntry
    MAX-ACCESS	not-accessible
    STATUS	current
    DESCRIPTION
	"Per virtual wireless interface channel scan results data."
    INDEX { wlanIfaceName, wlanScanResultID, wlanScanResultBssid }
    ::= { wlanScanResultsTable 1 }

WlanScanResultsEntry ::= SEQUENCE {
    wlanScanResultID				OCTET STRING,
    wlanScanResultBssid				MacAddress,
    wlanScanResultChannel			INTEGER,
    wlanScanResultRate				INTEGER,
    wlanScanResultNoise				INTEGER,
    wlanScanResultBeaconInterval		INTEGER,
    wlanScanResultCapabilities			BITS
}

wlanScanResultID OBJECT-TYPE
    SYNTAX	OCTET STRING (SIZE(0..32))
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The SSID/MESH ID for this scan result entry."
    ::= { wlanScanResultsEntry 1 }

wlanScanResultBssid OBJECT-TYPE
    SYNTAX	MacAddress
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The BSSID for this scan result entry."
    ::= { wlanScanResultsEntry 2 }

wlanScanResultChannel OBJECT-TYPE
    SYNTAX	INTEGER
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The operating channel for this scan result entry."
    ::= { wlanScanResultsEntry 3 }

wlanScanResultRate OBJECT-TYPE
    SYNTAX	INTEGER
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The operating rate of this scan result entry."
    ::= { wlanScanResultsEntry 4 }

wlanScanResultNoise OBJECT-TYPE
    SYNTAX	INTEGER
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The channel noise for this scan result entry."
    ::= { wlanScanResultsEntry 5 }

wlanScanResultBeaconInterval OBJECT-TYPE
    SYNTAX	INTEGER
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The beacon interval reported for this scan result entry."
    ::= { wlanScanResultsEntry 6 }

wlanScanResultCapabilities OBJECT-TYPE
    SYNTAX	WlanPeerCapabilityFlags
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The capabilities advertised for this scan result entry."
    ::= { wlanScanResultsEntry 7 }

wlanIfRoamParamsTable OBJECT-TYPE
    SYNTAX	SEQUENCE OF WlanIfRoamParamsEntry
    MAX-ACCESS	not-accessible
    STATUS	current
    DESCRIPTION
	"A table that contains the parameters that govern the roaming
	operation on a wireless interface."
    ::= { begemotWlanInterface 6 }

wlanIfRoamParamsEntry OBJECT-TYPE
    SYNTAX	WlanIfRoamParamsEntry
    MAX-ACCESS	not-accessible
    STATUS	current
    DESCRIPTION
	"An entry that contains the roaming parameters of a wireless
	interface."
    INDEX { wlanIfaceName, wlanIfRoamPhyMode }
    ::= { wlanIfRoamParamsTable 1 }

WlanIfRoamParamsEntry ::= SEQUENCE {
    wlanIfRoamPhyMode				INTEGER,
    wlanIfRoamRxSignalStrength			INTEGER,
    wlanIfRoamTxRateThreshold			INTEGER
}

wlanIfRoamPhyMode OBJECT-TYPE
    SYNTAX	WlanIfPhyMode
    MAX-ACCESS	not-accessible
    STATUS	current
    DESCRIPTION
	"The PHY mode for this roaming parameters entry."
    ::= { wlanIfRoamParamsEntry 1 }

wlanIfRoamRxSignalStrength OBJECT-TYPE
    SYNTAX	INTEGER
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The Receive Signal Strength for this roaming parameters entry."
    ::= { wlanIfRoamParamsEntry 2 }

wlanIfRoamTxRateThreshold OBJECT-TYPE
    SYNTAX	INTEGER
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The transmit rate threshold value for this roaming parameters
	 entry in Mb/s or MCS."
    ::= { wlanIfRoamParamsEntry 3 }

wlanIfTxParamsTable OBJECT-TYPE
    SYNTAX	SEQUENCE OF WlanIfTxParamsEntry
    MAX-ACCESS	not-accessible
    STATUS	current
    DESCRIPTION
	"A table that contains the parameters that govern the transmit
	operation on a wireless interface."
    ::= { begemotWlanInterface 7 }

wlanIfTxParamsEntry OBJECT-TYPE
    SYNTAX	WlanIfTxParamsEntry
    MAX-ACCESS	not-accessible
    STATUS	current
    DESCRIPTION
	"An entry that contains the transmit parameters of a wireless
	interface."
    INDEX { wlanIfaceName, wlanIfTxPhyMode }
    ::= { wlanIfTxParamsTable 1 }

WlanIfTxParamsEntry ::= SEQUENCE {
    wlanIfTxPhyMode				INTEGER,
    wlanIfTxUnicastRate				INTEGER,
    wlanIfTxMcastRate				INTEGER,
    wlanIfTxMgmtRate				INTEGER,
    wlanIfTxMaxRetryCount			INTEGER
}

wlanIfTxPhyMode OBJECT-TYPE
    SYNTAX	WlanIfPhyMode
    MAX-ACCESS	not-accessible
    STATUS	current
    DESCRIPTION
	"The PHY mode for this entry."
    ::= { wlanIfTxParamsEntry 1 }

wlanIfTxUnicastRate OBJECT-TYPE
    SYNTAX	INTEGER
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The value of this object specifies a fixed rate for transmitting
	unicast frames in this phy mode."
    ::= { wlanIfTxParamsEntry 2 }

wlanIfTxMcastRate OBJECT-TYPE
    SYNTAX	INTEGER
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The value of this object specifies a fixed rate for transmitting
	broadcast and multicast frames in this phy mode."
    ::= { wlanIfTxParamsEntry 3 }

wlanIfTxMgmtRate OBJECT-TYPE
    SYNTAX	INTEGER
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The value of this object specifies a fixed rate for transmitting
	management and/or control frames in this phy mode."
    ::= { wlanIfTxParamsEntry 4 }

wlanIfTxMaxRetryCount OBJECT-TYPE
    SYNTAX	INTEGER
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The maximum number of tries to use when sending unicast frames
	in this phy mode."
    ::= { wlanIfTxParamsEntry 5 }

-- ---------------------------------------------------------- --
--  The Statistics Database for Wireless interfaces
-- ---------------------------------------------------------- --

wlanIfaceStatisticsTable OBJECT-TYPE
    SYNTAX	SEQUENCE OF WlanIfaceStatisticsEntry
    MAX-ACCESS	not-accessible
    STATUS	current
    DESCRIPTION
	"A table that contains summary statistics for each virtual wireless
	interface on the managed device."
    ::= { begemotWlanStatistics 1 }

wlanIfaceStatisticsEntry OBJECT-TYPE
    SYNTAX	WlanIfaceStatisticsEntry
    MAX-ACCESS	not-accessible
    STATUS	current
    DESCRIPTION
	"A list of statistics for each virtual wireless interface."
    AUGMENTS { wlanInterfaceEntry }
    ::= { wlanIfaceStatisticsTable 1 }

WlanIfaceStatisticsEntry ::= SEQUENCE {
    wlanStatsRxBadVersion			Counter32,
    wlanStatsRxTooShort				Counter32,
    wlanStatsRxWrongBssid			Counter32,
    wlanStatsRxDiscardedDups			Counter32,
    wlanStatsRxWrongDir				Counter32,
    wlanStatsRxDiscardMcastEcho			Counter32,
    wlanStatsRxDiscardNoAssoc			Counter32,
    wlanStatsRxWepNoPrivacy			Counter32,
    wlanStatsRxWepUnencrypted			Counter32,
    wlanStatsRxWepFailed			Counter32,
    wlanStatsRxDecapsulationFailed		Counter32,
    wlanStatsRxDiscardMgmt			Counter32,
    wlanStatsRxControl				Counter32,
    wlanStatsRxBeacon				Counter32,
    wlanStatsRxRateSetTooBig			Counter32,
    wlanStatsRxElemMissing			Counter32,
    wlanStatsRxElemTooBig			Counter32,
    wlanStatsRxElemTooSmall			Counter32,
    wlanStatsRxElemUnknown			Counter32,
    wlanStatsRxChannelMismatch			Counter32,
    wlanStatsRxDropped				Counter32,
    wlanStatsRxSsidMismatch			Counter32,
    wlanStatsRxAuthNotSupported			Counter32,
    wlanStatsRxAuthFailed			Counter32,
    wlanStatsRxAuthCM				Counter32,
    wlanStatsRxAssocWrongBssid			Counter32,
    wlanStatsRxAssocNoAuth			Counter32,
    wlanStatsRxAssocCapMismatch			Counter32,
    wlanStatsRxAssocNoRateMatch			Counter32,
    wlanStatsRxBadWpaIE				Counter32,
    wlanStatsRxDeauthenticate			Counter32,
    wlanStatsRxDisassociate			Counter32,
    wlanStatsRxUnknownSubtype			Counter32,
    wlanStatsRxFailedNoBuf			Counter32,
    wlanStatsRxBadAuthRequest			Counter32,
    wlanStatsRxUnAuthorized			Counter32,
    wlanStatsRxBadKeyId				Counter32,
    wlanStatsRxCCMPSeqViolation			Counter32,
    wlanStatsRxCCMPBadFormat			Counter32,
    wlanStatsRxCCMPFailedMIC			Counter32,
    wlanStatsRxTKIPSeqViolation			Counter32,
    wlanStatsRxTKIPBadFormat			Counter32,
    wlanStatsRxTKIPFailedMIC			Counter32,
    wlanStatsRxTKIPFailedICV			Counter32,
    wlanStatsRxDiscardACL			Counter32,
    wlanStatsTxFailedNoBuf			Counter32,
    wlanStatsTxFailedNoNode			Counter32,
    wlanStatsTxUnknownMgmt			Counter32,
    wlanStatsTxBadCipher			Counter32,
    wlanStatsTxNoDefKey				Counter32,
    wlanStatsTxFragmented			Counter32,
    wlanStatsTxFragmentsCreated			Counter32,
    wlanStatsActiveScans			Counter32,
    wlanStatsPassiveScans			Counter32,
    wlanStatsTimeoutInactivity			Counter32,
    wlanStatsCryptoNoMem			Counter32,
    wlanStatsSwCryptoTKIP			Counter32,
    wlanStatsSwCryptoTKIPEnMIC			Counter32,
    wlanStatsSwCryptoTKIPDeMIC			Counter32,
    wlanStatsCryptoTKIPCM			Counter32,
    wlanStatsSwCryptoCCMP			Counter32,
    wlanStatsSwCryptoWEP			Counter32,
    wlanStatsCryptoCipherKeyRejected		Counter32,
    wlanStatsCryptoNoKey			Counter32,
    wlanStatsCryptoDeleteKeyFailed		Counter32,
    wlanStatsCryptoUnknownCipher		Counter32,
    wlanStatsCryptoAttachFailed			Counter32,
    wlanStatsCryptoKeyFailed			Counter32,
    wlanStatsCryptoEnMICFailed			Counter32,
    wlanStatsIBSSCapMismatch			Counter32,
    wlanStatsUnassocStaPSPoll			Counter32,
    wlanStatsBadAidPSPoll			Counter32,
    wlanStatsEmptyPSPoll			Counter32,
    wlanStatsRxFFBadHdr				Counter32,
    wlanStatsRxFFTooShort			Counter32,
    wlanStatsRxFFSplitError			Counter32,
    wlanStatsRxFFDecap				Counter32,
    wlanStatsTxFFEncap				Counter32,
    wlanStatsRxBadBintval			Counter32,
    wlanStatsRxDemicFailed			Counter32,
    wlanStatsRxDefragFailed			Counter32,
    wlanStatsRxMgmt				Counter32,
    wlanStatsRxActionMgmt			Counter32,
    wlanStatsRxAMSDUTooShort			Counter32,
    wlanStatsRxAMSDUSplitError			Counter32,
    wlanStatsRxAMSDUDecap			Counter32,
    wlanStatsTxAMSDUEncap			Counter32,
    wlanStatsAMPDUBadBAR			Counter32,
    wlanStatsAMPDUOowBar			Counter32,
    wlanStatsAMPDUMovedBAR			Counter32,
    wlanStatsAMPDURxBAR				Counter32,
    wlanStatsAMPDURxOor				Counter32,
    wlanStatsAMPDURxCopied			Counter32,
    wlanStatsAMPDURxDropped			Counter32,
    wlanStatsTxDiscardBadState			Counter32,
    wlanStatsTxFailedNoAssoc			Counter32,
    wlanStatsTxClassifyFailed			Counter32,
    wlanStatsDwdsMcastDiscard			Counter32,
    wlanStatsHTAssocRejectNoHT			Counter32,
    wlanStatsHTAssocDowngrade			Counter32,
    wlanStatsHTAssocRateMismatch		Counter32,
    wlanStatsAMPDURxAge				Counter32,
    wlanStatsAMPDUMoved				Counter32,
    wlanStatsADDBADisabledReject		Counter32,
    wlanStatsADDBANoRequest			Counter32,
    wlanStatsADDBABadToken			Counter32,
    wlanStatsADDBABadPolicy			Counter32,
    wlanStatsAMPDUStopped			Counter32,
    wlanStatsAMPDUStopFailed			Counter32,
    wlanStatsAMPDURxReorder			Counter32,
    wlanStatsScansBackground			Counter32,
    wlanLastDeauthReason			INTEGER,
    wlanLastDissasocReason			INTEGER,
    wlanLastAuthFailReason			INTEGER,
    wlanStatsBeaconMissedEvents			Counter32,
    wlanStatsRxDiscardBadStates			Counter32,
    wlanStatsFFFlushed				Counter32,
    wlanStatsTxControlFrames			Counter32,
    wlanStatsAMPDURexmt				Counter32,
    wlanStatsAMPDURexmtFailed			Counter32,
    wlanStatsReset				INTEGER
}

wlanStatsRxBadVersion OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of frames received by this interface that had bad version."
    ::= { wlanIfaceStatisticsEntry 1 }

wlanStatsRxTooShort OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of frames received by this interface that were too short."
    ::= { wlanIfaceStatisticsEntry 2 }

wlanStatsRxWrongBssid OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of frames received by this interface with wrong BSSID."
    ::= { wlanIfaceStatisticsEntry 3 }

wlanStatsRxDiscardedDups OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of received discarded duplicate frames by this interface."
    ::= { wlanIfaceStatisticsEntry 4 }

wlanStatsRxWrongDir OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of received frames by this interface that were dropped
	due to wrong direction."
    ::= { wlanIfaceStatisticsEntry 5 }

wlanStatsRxDiscardMcastEcho OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of received multicast echo frames discarded by this
	interface."
    ::= { wlanIfaceStatisticsEntry 6 }

wlanStatsRxDiscardNoAssoc OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of frames received by this interface that were dropped
	since no association existed with the sending station."
    ::= { wlanIfaceStatisticsEntry 7 }

wlanStatsRxWepNoPrivacy OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of frames received by this interface that were dropped
	since they contained WEP information and WEP privacy was off."
    ::= { wlanIfaceStatisticsEntry 8 }

wlanStatsRxWepUnencrypted OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of frames received by this interface that were dropped
	since they contained no WEP information and WEP privacy was on."
    ::= { wlanIfaceStatisticsEntry 9 }

wlanStatsRxWepFailed OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of frames received by this interface that were dropped
	since processing of the WEP information contained in them failed."
    ::= { wlanIfaceStatisticsEntry 10 }

wlanStatsRxDecapsulationFailed OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of received frames that were discarded by this interface
	due to decapsulation failure."
    ::= { wlanIfaceStatisticsEntry 11 }

wlanStatsRxDiscardMgmt OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of received management frames discarded by this interface."
    ::= { wlanIfaceStatisticsEntry 12 }

wlanStatsRxControl OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of control frames received by this interface."
    ::= { wlanIfaceStatisticsEntry 13 }

wlanStatsRxBeacon OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of beacon frames received by this interface."
    ::= { wlanIfaceStatisticsEntry 14 }

wlanStatsRxRateSetTooBig OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of frames received by this interface with extended
	supported rate element."
    ::= { wlanIfaceStatisticsEntry 15 }

wlanStatsRxElemMissing OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of frames received by this interface that were missing
	a required element."
    ::= { wlanIfaceStatisticsEntry 16 }

wlanStatsRxElemTooBig OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of frames received by this interface that contained an
	information element whose size was too big."
    ::= { wlanIfaceStatisticsEntry 17 }

wlanStatsRxElemTooSmall OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of frames received by this interface that contained an
	information element whose size was too small."
    ::= { wlanIfaceStatisticsEntry 18 }

wlanStatsRxElemUnknown OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of frames received by this interface that contained an
	unknown information element."
    ::= { wlanIfaceStatisticsEntry 19 }

wlanStatsRxChannelMismatch OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of frames received by this interface, that were discarded
	since they were received on a channel different from the one indicated
	in the DS params element id."
    ::= { wlanIfaceStatisticsEntry 20 }

wlanStatsRxDropped OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of frames received by this interface that were dropped due
	to unknown reason."
    ::= { wlanIfaceStatisticsEntry 21 }

wlanStatsRxSsidMismatch OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of frames received by this interface that had a bad SSID."
    ::= { wlanIfaceStatisticsEntry 22 }

wlanStatsRxAuthNotSupported OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of frames received by this interface that contained an
	unknown authentication algorithm."
    ::= { wlanIfaceStatisticsEntry 23 }

wlanStatsRxAuthFailed OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of frames received by this interface for which the
	authentication failed."
    ::= { wlanIfaceStatisticsEntry 24 }

wlanStatsRxAuthCM OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of frames received by this interface for which the
	authentication failed due to TKIP countermeasures enabled."
    ::= { wlanIfaceStatisticsEntry 25 }

wlanStatsRxAssocWrongBssid OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of frames received by this interface with association
	request that had a bad BSSID."
    ::= { wlanIfaceStatisticsEntry 26 }

wlanStatsRxAssocNoAuth OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of frames received by this interface with association
	request that came from unauthentication node."
    ::= { wlanIfaceStatisticsEntry 27 }

wlanStatsRxAssocCapMismatch OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of frames received by this interface with association
	request that had bad capabilities set."
    ::= { wlanIfaceStatisticsEntry 28 }

wlanStatsRxAssocNoRateMatch OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of frames received by this interface with association
	request that had unsupported rate set."
    ::= { wlanIfaceStatisticsEntry 29 }

wlanStatsRxBadWpaIE OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of frames received by this interface with association
	request that had no or invalid WPA information element."
    ::= { wlanIfaceStatisticsEntry 30 }

wlanStatsRxDeauthenticate OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of deauthentication requests received by this interface."
    ::= { wlanIfaceStatisticsEntry 31 }

wlanStatsRxDisassociate OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of deassociation requests received by this interface."
    ::= { wlanIfaceStatisticsEntry 32 }

wlanStatsRxUnknownSubtype OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of frames received by this interface that had unknown
	subtype."
    ::= { wlanIfaceStatisticsEntry 33 }

wlanStatsRxFailedNoBuf OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of frames received by this interface that were dropped
	due to lack of free buffers."
    ::= { wlanIfaceStatisticsEntry 34 }

wlanStatsRxBadAuthRequest OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of frames received by this interface for which
	authentication failed."
    ::= { wlanIfaceStatisticsEntry 35 }

wlanStatsRxUnAuthorized OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of non-PAE frames received by this interface prior to
	authorization."
    ::= { wlanIfaceStatisticsEntry 36 }

wlanStatsRxBadKeyId OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of frames received by this interface with bad key."
    ::= { wlanIfaceStatisticsEntry 37 }

wlanStatsRxCCMPSeqViolation OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of frames received by this interface that caused CCMP
	sequence violation."
    ::= { wlanIfaceStatisticsEntry 38 }

wlanStatsRxCCMPBadFormat OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of frames received by this interface that had bad CCMP
	format."
    ::= { wlanIfaceStatisticsEntry 39 }

wlanStatsRxCCMPFailedMIC OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of frames receivbed by this interface for which CCMP
	decryption failed due to MIC mismatch."
    ::= { wlanIfaceStatisticsEntry 40 }

wlanStatsRxTKIPSeqViolation OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of frames received by this interface that caused TKIP
	sequence violation.."
    ::= { wlanIfaceStatisticsEntry 41 }

wlanStatsRxTKIPBadFormat OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of frames received by this interface that were missing
	TKIP ExtIV."
    ::= { wlanIfaceStatisticsEntry 42 }

wlanStatsRxTKIPFailedMIC OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of frames received by this interface for which TKIP
	decryption failed due to MIC mismatch."
    ::= { wlanIfaceStatisticsEntry 43 }

wlanStatsRxTKIPFailedICV OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of frames received by this interface for which TKIP
	decryption failed due to ICV mismatch."
    ::= { wlanIfaceStatisticsEntry 44 }

wlanStatsRxDiscardACL OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of frames received by this interface that were
	disallowed by ACL."
    ::= { wlanIfaceStatisticsEntry 45 }

wlanStatsTxFailedNoBuf OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of frames that were not transmitted by this interface
	due to lack of free buffers."
    ::= { wlanIfaceStatisticsEntry 46 }

wlanStatsTxFailedNoNode OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of frames that were queued for transmit on this interface
	but were not sent since appropriate node for sending was not found."
    ::= { wlanIfaceStatisticsEntry 47 }

wlanStatsTxUnknownMgmt OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of unknown management frames transmitted by this interface."
    ::= { wlanIfaceStatisticsEntry 48 }

wlanStatsTxBadCipher OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of frames that were queued for transmit on this interface
	but were not send since the specified key was not setup."
    ::= { wlanIfaceStatisticsEntry 49 }

wlanStatsTxNoDefKey OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of frames that were queued for transmit on this interface
	but were not send since an appropriate key was not found."
    ::= { wlanIfaceStatisticsEntry 50 }

wlanStatsTxFragmented OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of fragmented frames transmitted by this interface."
    ::= { wlanIfaceStatisticsEntry 51 }

wlanStatsTxFragmentsCreated OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of created fragments transmitted by this interface."
    ::= { wlanIfaceStatisticsEntry 52 }

wlanStatsActiveScans OBJECT-TYPE
    SYNTAX	Counter32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of active scans performed by this interface."
    ::= { wlanIfaceStatisticsEntry 53 }

wlanStatsPassiveScans OBJECT-TYPE
    SYNTAX	Counter32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of passive scans performed by this interface."
    ::= { wlanIfaceStatisticsEntry 54 }

wlanStatsTimeoutInactivity OBJECT-TYPE
    SYNTAX	Counter32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of times a station/node was dropped by this interface
	due to inactivity timeout."
    ::= { wlanIfaceStatisticsEntry 55 }

wlanStatsCryptoNoMem OBJECT-TYPE
    SYNTAX	Counter32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number times attaching a crypto protocol to this interface
	failed due to lack of memory."
    ::= { wlanIfaceStatisticsEntry 56 }

wlanStatsSwCryptoTKIP OBJECT-TYPE
    SYNTAX	Counter32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of times TKIP encryption/decryption was handled in
	 software for frames received/transmitted by this interface."
    ::= { wlanIfaceStatisticsEntry 57 }

wlanStatsSwCryptoTKIPEnMIC OBJECT-TYPE
    SYNTAX	Counter32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of times TKIP MIC was added in software to frames
	transmitted by this interface."
    ::= { wlanIfaceStatisticsEntry 58 }

wlanStatsSwCryptoTKIPDeMIC OBJECT-TYPE
    SYNTAX	Counter32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of times TKIP MIC was stripped in software from frames
	received by this interface."
    ::= { wlanIfaceStatisticsEntry 59 }

wlanStatsCryptoTKIPCM OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of frames discarded by this interface due to TKIP
	counter measures."
    ::= { wlanIfaceStatisticsEntry 60 }

wlanStatsSwCryptoCCMP OBJECT-TYPE
    SYNTAX	Counter32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of times CCMP encryption/decryption was handled in
	 software for frames received/transmitted by this interface."
    ::= { wlanIfaceStatisticsEntry 61 }

wlanStatsSwCryptoWEP OBJECT-TYPE
    SYNTAX	Counter32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of times WEP encryption/decryption was handled in
	 software for frames received/transmitted by this interface."
    ::= { wlanIfaceStatisticsEntry 62 }

wlanStatsCryptoCipherKeyRejected OBJECT-TYPE
    SYNTAX	Counter32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of times a key was rejected for this interface."
    ::= { wlanIfaceStatisticsEntry 63 }

wlanStatsCryptoNoKey OBJECT-TYPE
    SYNTAX	Counter32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of times key setup for this interface failed."
    ::= { wlanIfaceStatisticsEntry 64 }

wlanStatsCryptoDeleteKeyFailed OBJECT-TYPE
    SYNTAX	Counter32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of times key deletion from driver for this interface
	failed."
    ::= { wlanIfaceStatisticsEntry 65 }

wlanStatsCryptoUnknownCipher OBJECT-TYPE
    SYNTAX	Counter32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of times key setup for this interface failed due to
	invalid cipher."
    ::= { wlanIfaceStatisticsEntry 66 }

wlanStatsCryptoAttachFailed OBJECT-TYPE
    SYNTAX	Counter32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of times attaching a cipher for this interface failed."
    ::= { wlanIfaceStatisticsEntry 67 }

wlanStatsCryptoKeyFailed OBJECT-TYPE
    SYNTAX	Counter32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of times setting a cipher in the driver for this
	interface failed."
    ::= { wlanIfaceStatisticsEntry 68 }

wlanStatsCryptoEnMICFailed OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of frames that were discarded by by this interface
	due to failed enmic."
    ::= { wlanIfaceStatisticsEntry 69 }

wlanStatsIBSSCapMismatch OBJECT-TYPE
    SYNTAX	Counter32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of times a BSSID change failed for an interface operating
	in ad hoc mode due to capabilities mismatch."
    ::= { wlanIfaceStatisticsEntry 70 }

wlanStatsUnassocStaPSPoll OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of ps-poll frames from unassociated station received
	by this interface."
    ::= { wlanIfaceStatisticsEntry 71 }

wlanStatsBadAidPSPoll OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of ps-poll frames with incorrect aid received by this
	interface."
    ::= { wlanIfaceStatisticsEntry 72 }

wlanStatsEmptyPSPoll OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of empty ps-poll frames received by this interface."
    ::= { wlanIfaceStatisticsEntry 73 }

wlanStatsRxFFBadHdr OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of fast frames with bad header received by this interface."
    ::= { wlanIfaceStatisticsEntry 74 }

wlanStatsRxFFTooShort OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of fast frames received by this interface, for which
	decapsulation failed."
    ::= { wlanIfaceStatisticsEntry 75 }

wlanStatsRxFFSplitError OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of fast frames received by this interface, for which
	decapsulation failed during split."
    ::= { wlanIfaceStatisticsEntry 76 }

wlanStatsRxFFDecap OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of fast frames received by this interface, that were
	successfully  decapsulated."
    ::= { wlanIfaceStatisticsEntry 77 }

wlanStatsTxFFEncap OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of encapsulated fast frames transmitted by this interface."
    ::= { wlanIfaceStatisticsEntry 78 }

wlanStatsRxBadBintval OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of frames with bogus beacon interval received by this
	interface."
    ::= { wlanIfaceStatisticsEntry 79 }

wlanStatsRxDemicFailed OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of frames received by this interface for which
	stripping of the MIC failed."
    ::= { wlanIfaceStatisticsEntry 80 }

wlanStatsRxDefragFailed OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of frames received by this interface for which
	defragmentation failed."
    ::= { wlanIfaceStatisticsEntry 81 }

wlanStatsRxMgmt OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of management frames received by this interface."
    ::= { wlanIfaceStatisticsEntry 82 }

wlanStatsRxActionMgmt OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of action management frames received by this interface."
    ::= { wlanIfaceStatisticsEntry 83 }

wlanStatsRxAMSDUTooShort OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of A-MSDU frames received by this interface for which
	decapsulaiton failed."
    ::= { wlanIfaceStatisticsEntry 84 }

wlanStatsRxAMSDUSplitError OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of A-MSDU frames received by this interface for which
	split failed."
    ::= { wlanIfaceStatisticsEntry 85 }

wlanStatsRxAMSDUDecap OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of A-MSDU frames received by this interface which
	were successfully decapsulaited."
    ::= { wlanIfaceStatisticsEntry 86 }

wlanStatsTxAMSDUEncap OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of encapsulated  A-MSDU frames transmitted by this
	interface."
    ::= { wlanIfaceStatisticsEntry 87 }

wlanStatsAMPDUBadBAR OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of A-MPDU  frames that were dropped by this interface
	source BAR frame processing was disabled."
    ::= { wlanIfaceStatisticsEntry 88 }

wlanStatsAMPDUOowBar OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of A-MPDU BAR before ADDBA frames received by this
	interface."
    ::= { wlanIfaceStatisticsEntry 89 }

wlanStatsAMPDUMovedBAR OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of times a BAR moved window occurred."
    ::= { wlanIfaceStatisticsEntry 90 }

wlanStatsAMPDURxBAR OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of A-MPDU BAR frames received by this interface."
    ::= { wlanIfaceStatisticsEntry 91 }

wlanStatsAMPDURxOor OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of out-of-order A-MPDU frames by received this interface."
    ::= { wlanIfaceStatisticsEntry 92 }

wlanStatsAMPDURxCopied OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of A-MPDU frames by copied down this interface."
    ::= { wlanIfaceStatisticsEntry 93 }

wlanStatsAMPDURxDropped OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of A-MPDU frames by dropped this interface."
    ::= { wlanIfaceStatisticsEntry 94 }

wlanStatsTxDiscardBadState OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of frames queued for transmit on this interface that
	were discarded due to interface state not ready for transmit."
    ::= { wlanIfaceStatisticsEntry 95 }

wlanStatsTxFailedNoAssoc OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of frames queued for transmit on this interface that
	were discarded since the receiving station was not associated."
    ::= { wlanIfaceStatisticsEntry 96 }

wlanStatsTxClassifyFailed OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of frames queued for transmit on this interface that
	were discarded since their priority was not determined."
    ::= { wlanIfaceStatisticsEntry 97 }

wlanStatsDwdsMcastDiscard OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of multicast over DWDS frames discarded by this interface."
    ::= { wlanIfaceStatisticsEntry 98 }

wlanStatsHTAssocRejectNoHT OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of management frames received from a non-HT stations
	that were rejected by this interface."
    ::= { wlanIfaceStatisticsEntry 99 }

wlanStatsHTAssocDowngrade OBJECT-TYPE
    SYNTAX	Counter32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of times HT was disallowed for an association on
	this interface due to WEP or TKIP requested."
    ::= { wlanIfaceStatisticsEntry 100 }

wlanStatsHTAssocRateMismatch OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of times rate mismatch occurred during HT rate set
	handling on this interface."
    ::= { wlanIfaceStatisticsEntry 101 }

wlanStatsAMPDURxAge OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of A-MPDU frames sent by this interface due to aging out."
    ::= { wlanIfaceStatisticsEntry 102 }

wlanStatsAMPDUMoved OBJECT-TYPE
    SYNTAX	Counter32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of time A-MPDU MSDU moved window occurred for this
	interface."
    ::= { wlanIfaceStatisticsEntry 103 }

wlanStatsADDBADisabledReject OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of received ADDBA frames that were discarded by this
	interface since ADDBA was disabled."
    ::= { wlanIfaceStatisticsEntry 104 }

wlanStatsADDBANoRequest OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of received ADDBA responses frames that were discarded
	by this interface due to no pending ADDBA."
    ::= { wlanIfaceStatisticsEntry 105 }

wlanStatsADDBABadToken OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of received ADDBA response frames that were discarded
	by this interface since ADDBA response caused dialogtoken mismatch."
    ::= { wlanIfaceStatisticsEntry 106 }

wlanStatsADDBABadPolicy OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of received ADDBA response frames that were discarded
	by this interface since ADDBA response caused policy mismatch."
    ::= { wlanIfaceStatisticsEntry 107 }

wlanStatsAMPDUStopped OBJECT-TYPE
    SYNTAX	Counter32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of times a A-MPDU stream stopped on this interface."
    ::= { wlanIfaceStatisticsEntry 108 }

wlanStatsAMPDUStopFailed OBJECT-TYPE
    SYNTAX	Counter32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of times a A-MPDU stream stop failed on this interface."
    ::= { wlanIfaceStatisticsEntry 109 }

wlanStatsAMPDURxReorder OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of received reordered A-MPDU frames on this interface."
    ::= { wlanIfaceStatisticsEntry 110 }

wlanStatsScansBackground OBJECT-TYPE
    SYNTAX	Counter32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of background scans started on this interface."
    ::= { wlanIfaceStatisticsEntry 111 }

wlanLastDeauthReason OBJECT-TYPE
    SYNTAX	WlanMgmtReasonCode
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The last received deauthenticate reason on this interface."
    ::= { wlanIfaceStatisticsEntry 112 }

wlanLastDissasocReason OBJECT-TYPE
    SYNTAX	WlanMgmtReasonCode
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The last received disassociate reason on this interface."
    ::= { wlanIfaceStatisticsEntry 113 }

wlanLastAuthFailReason OBJECT-TYPE
    SYNTAX	WlanMgmtReasonCode
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The last received authentication failed reason on this interface."
    ::= { wlanIfaceStatisticsEntry 114 }

wlanStatsBeaconMissedEvents OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of beacon miss notification events on this interface."
    ::= { wlanIfaceStatisticsEntry 115 }

wlanStatsRxDiscardBadStates OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of frames received on this interface that were discarded
	due to interface state not ready for receive."
    ::= { wlanIfaceStatisticsEntry 116 }

wlanStatsFFFlushed OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of fast frames flushed from the stage queue on this
	interface."
    ::= { wlanIfaceStatisticsEntry 117 }

wlanStatsTxControlFrames OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of control frames transmitted by this interface."
    ::= { wlanIfaceStatisticsEntry 118 }

wlanStatsAMPDURexmt OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of A-MPDU frames successfully retransmitted by this
	interface."
    ::= { wlanIfaceStatisticsEntry 119 }

wlanStatsAMPDURexmtFailed OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of A-MPDU frames for which retransmission failed on
	this interface."
    ::= { wlanIfaceStatisticsEntry 120 }

wlanStatsReset OBJECT-TYPE
    SYNTAX	INTEGER {
			no-op(1),
			clear(2)
		}
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The value of this object is used to reset the statistics on this
	interface."
    ::= { wlanIfaceStatisticsEntry 121 }

-- ---------------------------------------------------------- --
--  The WEP Configuration Database for Wireless interfaces
-- ---------------------------------------------------------- --

wlanWepInterfaceTable OBJECT-TYPE
    SYNTAX	SEQUENCE OF WlanWepInterfaceEntry
    MAX-ACCESS	not-accessible
    STATUS	current
    DESCRIPTION
	"A table that contains WEP configuration for the wireless interfaces
	on the managed system."
    ::= { begemotWlanWep 1 }

wlanWepInterfaceEntry OBJECT-TYPE
    SYNTAX	WlanWepInterfaceEntry
    MAX-ACCESS	not-accessible
    STATUS	current
    DESCRIPTION
	"WEP Configuration for wireless interface."
    INDEX { wlanIfaceName}
    ::= { wlanWepInterfaceTable 1 }

WlanWepInterfaceEntry ::= SEQUENCE {
    wlanWepMode					INTEGER,
    wlanWepDefTxKey				INTEGER
}

wlanWepMode OBJECT-TYPE
    SYNTAX	INTEGER {
		    off(0),
		    on(1),
		    mixed(2)
		}
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The WEP mode set on the interface."
    DEFVAL	{ off }
    ::= { wlanWepInterfaceEntry 1 }

wlanWepDefTxKey OBJECT-TYPE
    SYNTAX	INTEGER
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The index of the default WEP key for the interface."
    ::= { wlanWepInterfaceEntry 2 }

wlanWepKeyTable OBJECT-TYPE
    SYNTAX	SEQUENCE OF WlanWepKeyEntry
    MAX-ACCESS	not-accessible
    STATUS	current
    DESCRIPTION
	"A table that contains the configured WEP keys for a virtual
	wireless interface."
    ::= { begemotWlanWep 2 }

wlanWepKeyEntry OBJECT-TYPE
    SYNTAX	WlanWepKeyEntry
    MAX-ACCESS	not-accessible
    STATUS	current
    DESCRIPTION
	"A configured WEP Key entry."
    INDEX { wlanIfaceName, wlanWepKeyID }
    ::= { wlanWepKeyTable 1 }

WlanWepKeyEntry ::= SEQUENCE {
    wlanWepKeyID				INTEGER,
    wlanWepKeyLength				INTEGER,
    wlanWepKeySet				OCTET STRING,
    wlanWepKeyHash				OCTET STRING,
    wlanWepKeyStatus				RowStatus
}

wlanWepKeyID OBJECT-TYPE
    SYNTAX	INTEGER (1..4)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The WEP Key ID."
    ::= { wlanWepKeyEntry 1 }

wlanWepKeyLength OBJECT-TYPE
    SYNTAX	INTEGER
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The WEP Key length."
    ::= { wlanWepKeyEntry 2 }

wlanWepKeySet OBJECT-TYPE
    SYNTAX	OCTET STRING
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The WEP Key String to configure for this key. When GET is attempted
	for this column, an empty Octet String is returned."
    ::= { wlanWepKeyEntry 3 }

wlanWepKeyHash OBJECT-TYPE
    SYNTAX	OCTET STRING
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The SHA256 hash produced of the WEP Key String."
    ::= { wlanWepKeyEntry 4 }

wlanWepKeyStatus OBJECT-TYPE
    SYNTAX	RowStatus
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"This object is used for creating/deleting WEP keys."
    ::= { wlanWepKeyEntry 5 }

-- ---------------------------------------------------------- --
--  The MAC Access Control Database for Wireless interfaces
-- ---------------------------------------------------------- --

wlanMACAccessControlTable OBJECT-TYPE
    SYNTAX	SEQUENCE OF WlanMACAccessControlEntry
    MAX-ACCESS	not-accessible
    STATUS	current
    DESCRIPTION
	"A table that contains Access Control configuration for wireless
	interfaces operating as an access point."
    ::= { begemotWlanMACAccessControl 1 }

wlanMACAccessControlEntry OBJECT-TYPE
    SYNTAX	WlanMACAccessControlEntry
    MAX-ACCESS	not-accessible
    STATUS	current
    DESCRIPTION
	"The MAC Access Control configuration for a wireless interface
	operating as an access point."
    INDEX { wlanIfaceName}
    ::= { wlanMACAccessControlTable 1 }

WlanMACAccessControlEntry ::= SEQUENCE {
    wlanMACAccessControlPolicy			INTEGER,
    wlanMACAccessControlNacl			Counter32,
    wlanMACAccessControlFlush			INTEGER
}

wlanMACAccessControlPolicy OBJECT-TYPE
    SYNTAX	INTEGER {
		    open(0),
		    allow(1),
		    deny(2),
		    radius(7)
		}
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The value of this object specifies the MAC Access Control policy
	for this Host AP interface."
    DEFVAL	{ open }
    ::= { wlanMACAccessControlEntry 1 }

wlanMACAccessControlNacl OBJECT-TYPE
    SYNTAX	Counter32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of active MAC Access Control Entries in the Database
	for this Host AP interface."
    ::= { wlanMACAccessControlEntry 2 }

wlanMACAccessControlFlush OBJECT-TYPE
    SYNTAX	INTEGER {
		    no-op(0),
		    flush(1)
		}
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"This object is used to flush all entries from the MAC Access
	Control Database for the specified virtual wireless interface."
    ::= { wlanMACAccessControlEntry 3 }

wlanMACAccessControlMACTable OBJECT-TYPE
    SYNTAX	SEQUENCE OF WlanMACAccessControlMACEntry
    MAX-ACCESS	not-accessible
    STATUS	current
    DESCRIPTION
	"A table that contains Access Control MAC for virtual wireless
	interfaces operating in Host AP mode."
    ::= { begemotWlanMACAccessControl 2 }

wlanMACAccessControlMACEntry OBJECT-TYPE
    SYNTAX	WlanMACAccessControlMACEntry
    MAX-ACCESS	not-accessible
    STATUS	current
    DESCRIPTION
	"The MAC Access Control configuration database with MAC addresses
	for a virtual wireless interface."
    INDEX { wlanIfaceName, wlanMACAccessControlMAC }
    ::= { wlanMACAccessControlMACTable 1 }

WlanMACAccessControlMACEntry ::= SEQUENCE {
    wlanMACAccessControlMAC			MacAddress,
    wlanMACAccessControlMACStatus		RowStatus
}

wlanMACAccessControlMAC OBJECT-TYPE
    SYNTAX	MacAddress
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The value of this object specifies the station's MAC to which
	the Access Control policy will be applied."
    ::= { wlanMACAccessControlMACEntry 1 }

wlanMACAccessControlMACStatus OBJECT-TYPE
    SYNTAX	RowStatus
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The object is used to add or delete MAC entries from the Access
	Control Database for this interface operating in Host AP mode.
	To add an entry the value of this object should be set to createAndGo,
	a value of destroy will remove an existing entry. A GET on this object
	will always return value active."
    ::= { wlanMACAccessControlMACEntry 2 }

-- ---------------------------------------------------------- --
--  The Mesh Routing Database for interfaces operating in mesh mode
-- ---------------------------------------------------------- --

wlanMeshRoutingConfig		OBJECT IDENTIFIER ::= { begemotWlanMeshRouting 1 }

wlanMeshInterface		OBJECT IDENTIFIER ::= { begemotWlanMeshRouting 2 }

wlanMeshRoute			OBJECT IDENTIFIER ::= { begemotWlanMeshRouting 3 }

wlanMeshStatistics		OBJECT IDENTIFIER ::= { begemotWlanMeshRouting 4 }

wlanMeshRouteProtocols		OBJECT IDENTIFIER ::= { begemotWlanMeshRouting 5 }

wlanMeshMaxRetries OBJECT-TYPE
    SYNTAX	INTEGER
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Maximum retries during peer link establishment for wireless mesh
	routing operation."
    DEFVAL	{ 2 }
    ::= { wlanMeshRoutingConfig 1 }

wlanMeshConfirmTimeout OBJECT-TYPE
    SYNTAX	INTEGER
    UNITS	"milliseconds"
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Confirm state timeout for wireless mesh routing operation."
    DEFVAL	{ 40 }
    ::= { wlanMeshRoutingConfig 2 }

wlanMeshHoldingTimeout OBJECT-TYPE
    SYNTAX	INTEGER
    UNITS	"milliseconds"
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Holding state timeout for wireless mesh routing operation."
    DEFVAL	{ 40 }
    ::= { wlanMeshRoutingConfig 3 }

wlanMeshRetryTimeout OBJECT-TYPE
    SYNTAX	INTEGER
    UNITS	"milliseconds"
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Retry timeout for wireless mesh routing operation."
    DEFVAL	{ 40 }
    ::= { wlanMeshRoutingConfig 4 }

wlanMeshInterfaceTable OBJECT-TYPE
    SYNTAX	SEQUENCE OF WlanMeshInterfaceEntry
    MAX-ACCESS	not-accessible
    STATUS	current
    DESCRIPTION
	"A table that contains information for wireless interfaces operating
	as wireless mesh points."
    ::= { wlanMeshInterface 1 }

wlanMeshInterfaceEntry OBJECT-TYPE
    SYNTAX	WlanMeshInterfaceEntry
    MAX-ACCESS	not-accessible
    STATUS	current
    DESCRIPTION
	"Wireless Mesh Routing information for an interface operating as
	mesh point."
    INDEX { wlanIfaceName }
    ::= { wlanMeshInterfaceTable 1 }

WlanMeshInterfaceEntry ::= SEQUENCE {
    wlanMeshId					OCTET STRING,
    wlanMeshTTL					INTEGER,
    wlanMeshPeeringEnabled			TruthValue,
    wlanMeshForwardingEnabled			TruthValue,
    wlanMeshMetric				INTEGER,
    wlanMeshPath				INTEGER,
    wlanMeshRoutesFlush				INTEGER
}

wlanMeshId OBJECT-TYPE
    SYNTAX	OCTET STRING (SIZE(1..32))
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The desired Mesh Identifier for the interface."
    ::= { wlanMeshInterfaceEntry 1 }

wlanMeshTTL OBJECT-TYPE
    SYNTAX	INTEGER
    UNITS	"hops"
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The number of hops a packet may be forwarded before it is discarded."
    DEFVAL	{ 31 }
    ::= { wlanMeshInterfaceEntry 2 }

wlanMeshPeeringEnabled OBJECT-TYPE
    SYNTAX	TruthValue
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Enable or disable peering with neighbor mesh stations for this
	interface."
    DEFVAL	{ true }
    ::= { wlanMeshInterfaceEntry 3 }

wlanMeshForwardingEnabled OBJECT-TYPE
    SYNTAX	TruthValue
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Enable or disable forwarding packets by this interface."
    DEFVAL	{ true }
    ::= { wlanMeshInterfaceEntry 4 }

wlanMeshMetric OBJECT-TYPE
    SYNTAX	INTEGER {
			unknown(0),
			airtime(1)
		}
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The link metric protocol used by the interface."
    DEFVAL	{ airtime }
    ::= { wlanMeshInterfaceEntry 5 }

wlanMeshPath OBJECT-TYPE
    SYNTAX	INTEGER {
			unknown(0),
			hwmp(1)
		}
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The path selection protocol used by the interface."
    DEFVAL	{ hwmp }
    ::= { wlanMeshInterfaceEntry 6 }

wlanMeshRoutesFlush OBJECT-TYPE
    SYNTAX	INTEGER {
		    no-op(0),
		    flush(1)
		}
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"This object is used to flush all mesh route entries from the mesh
	routing table for the specified interface."
    ::= { wlanMeshInterfaceEntry 7 }

wlanMeshNeighborTable OBJECT-TYPE
    SYNTAX	SEQUENCE OF WlanMeshNeighborEntry
    MAX-ACCESS	not-accessible
    STATUS	current
    DESCRIPTION
	"A table that contains information for the neighbors of wireless
	interfaces operating in mesh mode."
    ::= { wlanMeshInterface 2 }

wlanMeshNeighborEntry OBJECT-TYPE
    SYNTAX	WlanMeshNeighborEntry
    MAX-ACCESS	not-accessible
    STATUS	current
    DESCRIPTION
	"Information for all neighbors of a wireless interface operating as
	a mesh point."
    INDEX { wlanIfaceName, wlanMeshNeighborAddress }
    ::= { wlanMeshNeighborTable 1 }

WlanMeshNeighborEntry ::= SEQUENCE {
    wlanMeshNeighborAddress			MacAddress,
    wlanMeshNeighborFrequency			INTEGER,
    wlanMeshNeighborLocalId			INTEGER,
    wlanMeshNeighborPeerId			INTEGER,
    wlanMeshNeighborPeerState			INTEGER,
    wlanMeshNeighborCurrentTXRate		INTEGER,
    wlanMeshNeighborRxSignalStrength		INTEGER,
    wlanMeshNeighborIdleTimer			INTEGER,
    wlanMeshNeighborTxSequenceNo		INTEGER,
    wlanMeshNeighborRxSequenceNo		INTEGER
}

wlanMeshNeighborAddress OBJECT-TYPE
    SYNTAX	MacAddress
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The Ethernet address of this neighbor."
    ::= { wlanMeshNeighborEntry 1 }

wlanMeshNeighborFrequency OBJECT-TYPE
    SYNTAX	INTEGER
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The operating frequency for the link with this neighbor."
    ::= { wlanMeshNeighborEntry 2 }

wlanMeshNeighborLocalId OBJECT-TYPE
    SYNTAX	INTEGER
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The local mesh id for this neighbor."
    ::= { wlanMeshNeighborEntry 3 }

wlanMeshNeighborPeerId OBJECT-TYPE
    SYNTAX	INTEGER
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The mesh peer id of this neighbor."
    ::= { wlanMeshNeighborEntry 4 }

wlanMeshNeighborPeerState OBJECT-TYPE
    SYNTAX	INTEGER {
			idle(0),
			openTx(1),
			openRx(2),
			confirmRx(3),
			established(4),
			closing(5)
		}
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The current link state for this neighbor."
    ::= { wlanMeshNeighborEntry 5 }

wlanMeshNeighborCurrentTXRate OBJECT-TYPE
    SYNTAX	INTEGER
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The current transmit rate for this neighbor."
    ::= { wlanMeshNeighborEntry 6 }

wlanMeshNeighborRxSignalStrength OBJECT-TYPE
    SYNTAX	INTEGER
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The average receive signal strength for this neighbor."
    ::= { wlanMeshNeighborEntry 7 }

wlanMeshNeighborIdleTimer OBJECT-TYPE
    SYNTAX	INTEGER
    UNITS	"seconds"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The value of this neighbor's inactivity timer."
    ::= { wlanMeshNeighborEntry 8 }

wlanMeshNeighborTxSequenceNo OBJECT-TYPE
    SYNTAX	INTEGER
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The last sequence number transmitted to this neighbor."
    ::= { wlanMeshNeighborEntry 9 }

wlanMeshNeighborRxSequenceNo OBJECT-TYPE
    SYNTAX	INTEGER
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The last sequence number received from this neighbor."
    ::= { wlanMeshNeighborEntry 10 }

wlanMeshRouteTable OBJECT-TYPE
    SYNTAX	SEQUENCE OF WlanMeshRouteEntry
    MAX-ACCESS	not-accessible
    STATUS	current
    DESCRIPTION
	"A table that contains the mesh routing table for interfaces operating
	as mesh points, used for forwarding packets on a mesh network."
    ::= { wlanMeshRoute 1 }

wlanMeshRouteEntry OBJECT-TYPE
    SYNTAX	WlanMeshRouteEntry
    MAX-ACCESS	not-accessible
    STATUS	current
    DESCRIPTION
	"Wireless Mesh Routing Table entries for virtual wireless interfaces."
    INDEX { wlanIfaceName, wlanMeshRouteDestination }
    ::= { wlanMeshRouteTable 1 }

WlanMeshRouteEntry ::= SEQUENCE {
    wlanMeshRouteDestination			MacAddress,
    wlanMeshRouteNextHop			MacAddress,
    wlanMeshRouteHops				INTEGER,
    wlanMeshRouteMetric				Unsigned32,
    wlanMeshRouteLifeTime			Unsigned32,
    wlanMeshRouteLastMseq			Unsigned32,
    wlanMeshRouteFlags				BITS,
    wlanMeshRouteStatus				RowStatus
}

wlanMeshRouteDestination OBJECT-TYPE
    SYNTAX	MacAddress
    MAX-ACCESS	read-create
    STATUS	current
    DESCRIPTION
	"The mesh route entry's destination address."
    ::= { wlanMeshRouteEntry 1 }

wlanMeshRouteNextHop OBJECT-TYPE
    SYNTAX	MacAddress
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The mesh route entry's next hop address."
    ::= { wlanMeshRouteEntry 2 }

wlanMeshRouteHops OBJECT-TYPE
    SYNTAX	INTEGER
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of hops for this mesh route entry."
    ::= { wlanMeshRouteEntry 3 }

wlanMeshRouteMetric OBJECT-TYPE
    SYNTAX	Unsigned32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The metric of this mesh route entry."
    ::= { wlanMeshRouteEntry 4 }

wlanMeshRouteLifeTime OBJECT-TYPE
    SYNTAX	Unsigned32
    UNITS	"seconds"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The life time of this mesh route entry."
    ::= { wlanMeshRouteEntry 5 }

wlanMeshRouteLastMseq OBJECT-TYPE
    SYNTAX	Unsigned32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The last sequence number seen from this destination."
    ::= { wlanMeshRouteEntry 6 }

wlanMeshRouteFlags OBJECT-TYPE
    SYNTAX	BITS {
			valid(1),
			proxy(2)
		}
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The Mesh Route entry's flags."
    ::= { wlanMeshRouteEntry 7 }

wlanMeshRouteStatus OBJECT-TYPE
    SYNTAX	RowStatus
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The object is used to add or delete entries from the mesh routing
	table for the virtual wireless interface."
    ::= { wlanMeshRouteEntry 8 }

wlanMeshStatsTable OBJECT-TYPE
    SYNTAX	SEQUENCE OF WlanMeshStatsEntry
    MAX-ACCESS	not-accessible
    STATUS	current
    DESCRIPTION
	"A table that contains summary statistics for each virtual wireless
	interface operating as mesh point."
    ::= { wlanMeshStatistics 1 }

wlanMeshStatsEntry OBJECT-TYPE
    SYNTAX	WlanMeshStatsEntry
    MAX-ACCESS	not-accessible
    STATUS	current
    DESCRIPTION
	"A list of statistics for each virtual wireless interface operating
	as mesh point."
    INDEX { wlanIfaceName }
    ::= { wlanMeshStatsTable 1 }

WlanMeshStatsEntry ::= SEQUENCE {
    wlanMeshDroppedBadSta			Counter32,
    wlanMeshDroppedNoLink			Counter32,
    wlanMeshNoFwdTtl				Counter32,
    wlanMeshNoFwdBuf				Counter32,
    wlanMeshNoFwdTooShort			Counter32,
    wlanMeshNoFwdDisabled			Counter32,
    wlanMeshNoFwdPathUnknown			Counter32,
    wlanMeshDroppedBadAE			Counter32,
    wlanMeshRouteAddFailed			Counter32,
    wlanMeshDroppedNoProxy			Counter32,
    wlanMeshDroppedMisaligned			Counter32
}

wlanMeshDroppedBadSta OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of frames dropped by this interface since they were
	received from a non-mesh station."
    ::= { wlanMeshStatsEntry 1 }

wlanMeshDroppedNoLink OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of frames dropped by this interface since no link had
	been established."
    ::= { wlanMeshStatsEntry 2 }

wlanMeshNoFwdTtl OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of frames that were not forwarded by this interface
	because of a zero TTL."
    ::= { wlanMeshStatsEntry 3 }

wlanMeshNoFwdBuf OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of frames that were not forwarded by this interface
	due to lack of free buffers."
    ::= { wlanMeshStatsEntry 4 }

wlanMeshNoFwdTooShort OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of frames that were not forwarded by this interface
	due to missing headers."
    ::= { wlanMeshStatsEntry 5 }

wlanMeshNoFwdDisabled OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of frames that were not forwarded by this interface
	since forwarding was disabled."
    ::= { wlanMeshStatsEntry 6 }

wlanMeshNoFwdPathUnknown OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of frames that were not forwarded by this interface
	since the path was unknown."
    ::= { wlanMeshStatsEntry 7 }

wlanMeshDroppedBadAE OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of frames that were dropped by this interface since
	the AE was invalid."
    ::= { wlanMeshStatsEntry 8 }

wlanMeshRouteAddFailed OBJECT-TYPE
    SYNTAX	Counter32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of times an addition of a route to the mesh routing
	table for this interface failed."
    ::= { wlanMeshStatsEntry 9 }

wlanMeshDroppedNoProxy OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of frames that were dropped by this interface since
	proxying was not enabled on the interface."
    ::= { wlanMeshStatsEntry 10 }

wlanMeshDroppedMisaligned OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of frames that were dropped by this interface due to
	bad alignment."
    ::= { wlanMeshStatsEntry 11 }

-- ---------------------------------------------------------- --
--  Subtrees containing data for each supported mesh routing protocol.
-- ---------------------------------------------------------- --

wlanMeshProtoHWMP		OBJECT IDENTIFIER ::= { wlanMeshRouteProtocols 1 }

-- ---------------------------------------------------------- --
--  Hybrid Wireless Mesh Protocol database.
-- ---------------------------------------------------------- --
wlanMeshHWMPConfig		OBJECT IDENTIFIER ::= { wlanMeshProtoHWMP 1 }

wlanMeshHWMPInterface		OBJECT IDENTIFIER ::= { wlanMeshProtoHWMP 2 }

wlanMeshHWMPStatistics		OBJECT IDENTIFIER ::= { wlanMeshProtoHWMP 3 }

wlanHWMPRouteInactiveTimeout OBJECT-TYPE
    SYNTAX	INTEGER
    UNITS	"milliseconds"
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The HWMP Route inactivity timeout."
    DEFVAL	{ 5000 }
    ::= { wlanMeshHWMPConfig 1 }

wlanHWMPRootAnnounceInterval OBJECT-TYPE
    SYNTAX	INTEGER
    UNITS	"milliseconds"
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The HWMP Root Announcement interval."
    DEFVAL	{ 1000 }
    ::= { wlanMeshHWMPConfig 2 }

wlanHWMPRootInterval OBJECT-TYPE
    SYNTAX	INTEGER
    UNITS	"milliseconds"
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The HWMP Root interval."
    DEFVAL	{ 2000 }
    ::= { wlanMeshHWMPConfig 3 }

wlanHWMPRootTimeout  OBJECT-TYPE
    SYNTAX	INTEGER
    UNITS	"milliseconds"
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The root PREQ timeout."
    DEFVAL	{ 5000 }
    ::= { wlanMeshHWMPConfig 4 }

wlanHWMPPathLifetime OBJECT-TYPE
    SYNTAX	INTEGER
    UNITS	"milliseconds"
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The HWMP path entry lifetime."
    DEFVAL	{ 500 }
    ::= { wlanMeshHWMPConfig 5 }

wlanHWMPReplyForwardBit OBJECT-TYPE
    SYNTAX	INTEGER
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"A non-zero value for this object specifies that RF bit shall be
	set on generated PREQs."
    DEFVAL	{ 1 }
    ::= { wlanMeshHWMPConfig 6 }

wlanHWMPTargetOnlyBit OBJECT-TYPE
    SYNTAX	INTEGER
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"A non-zero value for this object specifies that TO bit shall be
	set on generated PREQs."
    DEFVAL	{ 0 }
    ::= { wlanMeshHWMPConfig 7 }

wlanHWMPInterfaceTable OBJECT-TYPE
    SYNTAX	SEQUENCE OF WlanHWMPInterfaceEntry
    MAX-ACCESS	not-accessible
    STATUS	current
    DESCRIPTION
	"A table that contains information for wireless interfaces
	operating in mesh mode."
    ::= { wlanMeshHWMPInterface 1 }

wlanHWMPInterfaceEntry OBJECT-TYPE
    SYNTAX	WlanHWMPInterfaceEntry
    MAX-ACCESS	not-accessible
    STATUS	current
    DESCRIPTION
	"Wireless Mesh Routing HWMP information for a wireless interface."
    INDEX { wlanIfaceName }
    ::= { wlanHWMPInterfaceTable 1 }

WlanHWMPInterfaceEntry ::= SEQUENCE {
    wlanHWMPRootMode				INTEGER,
    wlanHWMPMaxHops				INTEGER
}

wlanHWMPRootMode OBJECT-TYPE
    SYNTAX	INTEGER {
			disabled(1),
			normal(2),
			proactive(3),
			rann(4)
		}
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"This object is used to configure whether the interface will operate
	as root node and specify root node mode."
    DEFVAL	{ disabled }
    ::= { wlanHWMPInterfaceEntry 1 }

wlanHWMPMaxHops OBJECT-TYPE
    SYNTAX	INTEGER
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"The maximum number of hops allowed on an HMWP path for this interface."
    DEFVAL	{ 31 }
    ::= { wlanHWMPInterfaceEntry 2 }

wlanMeshHWMPStatsTable OBJECT-TYPE
    SYNTAX	SEQUENCE OF WlanMeshHWMPStatsEntry
    MAX-ACCESS	not-accessible
    STATUS	current
    DESCRIPTION
	"A table that contains summary statistics for HWMP operation on an
	interface operating as mesh point."
    ::= { wlanMeshHWMPStatistics 1 }

wlanMeshHWMPStatsEntry OBJECT-TYPE
    SYNTAX	WlanMeshHWMPStatsEntry
    MAX-ACCESS	not-accessible
    STATUS	current
    DESCRIPTION
	"A list of HWMP statistics for each wlan interface operating as HWMP
	mesh point."
    INDEX { wlanIfaceName }
    ::= { wlanMeshHWMPStatsTable 1 }

WlanMeshHWMPStatsEntry ::= SEQUENCE {
    wlanMeshHWMPWrongSeqNo			Counter32,
    wlanMeshHWMPTxRootPREQ			Counter32,
    wlanMeshHWMPTxRootRANN			Counter32,
    wlanMeshHWMPProxy				Counter32
}

wlanMeshHWMPWrongSeqNo OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of HWMP frames with wrong sequence number received by
	this interface."
    ::= { wlanMeshHWMPStatsEntry 1 }

wlanMeshHWMPTxRootPREQ OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of HWMP Root PREQ frames sent by this interface."
    ::= { wlanMeshHWMPStatsEntry 2 }

wlanMeshHWMPTxRootRANN OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of HWMP Root RANN frames sent by this interface."
    ::= { wlanMeshHWMPStatsEntry 3 }

wlanMeshHWMPProxy OBJECT-TYPE
    SYNTAX	Counter32
    UNITS	"frames"
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The number of HWMP PREP frames discarded by this interface due to
	the HWMP route being marked as proxy."
    ::= { wlanMeshHWMPStatsEntry 4 }

END